1 / 1
Vernier Force Meter Scale Conversion
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Plastic parts to convert your Go Direct Force Sensor to a scale.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 64
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was inspired by another model on this site, which converted an older style force sensor to a scale, so I decided to design my own for the Go Direct Force Sensor. It should work well with the provided plastic screw and the hex fitting on the top should form a tight fit with the sensor end. You can add a screw (M3) to the top in order to secure it.
Printing recommendations:
- 0.2 mm layer height or better
- Supports for screw holes
- Recommended PETG (PLA is shown)
Enjoy!
I did have a bit of trouble printing the scale top piece, as it did not want to stay stuck to my print surface.