1 / 1
Vernier Force Meter Scale Conversion
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Plastic parts to convert your Go Direct Force Sensor to a scale.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 9
- Makes
- 0
- Views
- 64
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I was inspired by another model on this site, which converted an older style force sensor to a scale, so I decided to design my own for the Go Direct Force Sensor. It should work well with the provided plastic screw and the hex fitting on the top should form a tight fit with the sensor end. You can add a screw (M3) to the top in order to secure it.
Printing recommendations:
- 0.2 mm layer height or better
- Supports for screw holes
- Recommended PETG (PLA is shown)
Enjoy!
I did have a bit of trouble printing the scale top piece, as it did not want to stay stuck to my print surface.