166 models
CZ: (EN version follows) Do školy jsme koupili sadu Vernier - Aparatura pro studium rotačního pohybu (GDX-CFA) . K dokonalosti jí chyběla možnost někam uložit nepoužívaná závaží. Trojúhelníková základna obsahuje předvrtané otvory, které…
Print approx. €1.20–€1.47 excl. taxPreliminary estimate for PETGSource material: PET
What it is A compact tool to determine angles. It also includes a 120 mm linear scale and ring gauges from 1 to 9 mm in 1mm increments (clearance designed is 0.1 mm). What to print There are three parts awaiting you, which can be printed…
Hey team, There are already a few great models on Printables for Vernier calipers but for a bit of fun I thought I would give it a try and share my results. The overall design is the classic shape and has features you would find on a…
A vernier scale is a visual aid to take an accurate measurement reading between two graduation markings on a linear scale by using mechanical interpolation; thereby increasing resolution and reducing measurement uncertainty by using…
I couldn't remember initially where I'd gotten the idea to use the moire effect for motion amplification in this way, but I think a lot of it came from this clock project: https://www.thingiverse.com/thing:5173948 This is a radius gauge;…
3D Printing Guide: Vernier Caliper Introduction: This guide describes the 3D printing of a vernier caliper, a versatile measuring tool designed for precise measurements in the two-decimal-point range. The caliper is printed in multiple…
Simple wall-mounted vernier caliper holder. Use double-sided tape to secure it in place. Print with supports for the two prongs.
I designed this as I am always using my verniers at work and home, but never get round to putting them back into their cases to keep them protected. They just end up left on my desks where on day someone is bound to knock them off. This…
Can be used for quick, rough measurements up to 50mm. The vernier scale requires support. After printing, slide the vernier onto the main body and push the lock pin in from the bottom side.
The holder works for the slightly fatter plastic calipers and the slightly thinner metal types. Easy to insert and remove the calipers. Print upside down. Use a brim to help hold the pegboard tips down if your adhesion to the buildplate…
The outside swirl pattern will give the illusion of rotating 378° when the dial only move 1.8° (360°/200 steps). This is possible due to the interference of different number of windows and color notches in the base. The angle of the…
This grind size indicator includes a vernier scale that allows for precise sub-tick adjustment on a stock DF64. Each gap in the vernier represents 1/10th of a stock tick mark. Easily and repeatably adjust down to the 1 micron resolution!…
I decided to remix @Alberto Digital Caliper Holder after a few weeks of use I noticed my caliper would slant to one-side after taking a closer look I noticed that the fine adjustment thumb wheel on my caliper was coursing the issue…
3D printable callipers for quick on the go measurements that don't require ultra high precision. Print with a 0.2mm nozzle. I used PETG for its strength, but other materials would work too. Print the depth gauge separately, and use a…
This is an open-source vernier-style throttle for use with flight simulators! Build Documentation: ( https://create.arduino.cc/editor/vince_prints/26fd18d3-42d0-418f-9d31-a8dba8ad6354/preview ) Video Demo and Build Guide: CadetYoke:…
Remix of great design by AMT, allows for easier readable legends on single color print or with bad retraction.
This is a set of flexible covers for vernier calipers, it should fit most calipers both digital and otherwise. My hope is that it will reduce damage to the jaws of the calipers. Ideally it would hold the calipers very slightly open but I…
Have you ever had to guess the radius (or diameter) of a curved object? This tool helps you measure a numeric answer to that question! Radius = Caliper Reading X 2.414 How to use: Insert the base of your caliper in the slot of the tool…
This is great while working at your desk measuring small things that you need to draw and print. The top and bottom “teeth” measure inside and outside dimensions. The pointy extension on the right end measures hole depth. The hash marks…
I designed a set of calipers that allow for measurements of 0.1 mm precision. The calipers have all the normal bits: internal and external measurement arms as well as a depth gauge. The scale allows you to read up to 0.1mm, but the…
This protractor has a Vernier scale on the pointer, which lets you read angles with 0.1° precision. Whether you can print and assemble it that accurately is a different matter. I put effort into the gcode to get the seams in good spots…
Caliper depth measuring foot to fit an unbranded vernier caliper with body dimensions 16mm * 3.5mm having small plates on both sides I added a headless M3 screw to secure the caliper in place but a standard M3 screw can be used too…
Case for Mitutoyo N15 530-101.
Designed in Blender. required bed space 300x300 nozzle: 0.4 supports: yes layer height: 0.1 infill: 5% The piece might be tight at first, it will ride smoothly after a couple times you use it. Alternative version included for ender 3,…
This is a more aesthetically pleasing updated version of my original Vernier & Pen Desk Organiser. I have been using my original version every day at home and work since I made it. The original was designed to be functional with not much…
Educational model of vernier caliper. Not for precise measurement. INSTRUCTIONS : Filament: PLA. Layer Height: 0.2mm Perimeters: 2 Infill: 25%
I wanted a miter gauge that was more precise than the ones that typically come with saws. This model features an easy-to-read scale with a vernier subscale measuring down to 0.05 degree precision. Modeled in two sizes, the smaller for…
Needed a simple case for my vernier, remixed this to add my logo and slide over secures to keep the case closed
Converting a broken electronic caliper to a vernier caliper A few years back I bought a cheap caliper of the Aldi "Workzone" brand. This particular unit consumed batteries faster than I consume chocolate, and one day I found that the unit…
This is a remix of the following parts. I literally smooshed them together and added some holes and a few chamfers: Bracket vernier calliper (Peg mount) ( https://www.thingiverse.com/thing:2866877 ) by ArneBanane Pegboard 2 position blank…
Vernier calipers Vernier calipers are used to measure lengths of objects, inside and outside diameters, depths of holes, and step dimensions. I have simplified them some and remember its a 3D printed tool, accuracy is limited. I added a…
Simple vertical desk calliper holders with Fusion 360 file Designed for these Preciva digital vernier calipers: https://amzn.to/3MvyVmC 0.2mm Standard Model: V2 square caliper Printing Time: 27m13s Weight: 16g SUNLU Recycled Black PLA…
Print with supports for the skadis hooks.
Remix of https://www.printables.com/model/224223-holder-for-verniercalliper-with-thumb-wheel which is a remix of https://www.printables.com/model/55232-digital-caliper-holder I modified for vertical printing with no supports by adding…
Parkside Vernier Caliper Wall Mount & Holder All our designs are free to download and use. Your support fuels our creativity, if you download/enjoyed this file, please leave a like. Thx All trademarks, logos and brand names are the…
I bevelled the slots in the housing to enhance the readability of the "Moire" digit.
I made these adapters to use my Mitutoyo 530-122 vernier caliper to measure wear on my car disc brake rotors and avoid the outer lip left when the rotor sees a lot of wear. The offset should be 20 mm, if your printer is not accurate…
Stand for 300mm vernier calipers - remixed
A big vernier calliper with real steel scale is help us to take big dimensions with exact precision. Accuracy of this vernier is depend on your scale. example: with my scale it shows plus/minus 2mm in my dimensions. so make sure you can…
This is a remix of the ' Universal Caliper Mount ' for tool boards with 45 mm keyhole spacing. Thanks to the provided *.f3d file from swiss_beluga it was easy to adapt the mount to fit my tool wall system. Can be hung on a tool wall with…
This is a project I have been working on for a while. I want to first extend my thanks for the original model, which can be found here: https://www.thingiverse.com/thing:2336754 This kit is designed to work on the Vernier Physics Track.…
I really like the design that this maker came up with. However I like to print things in fast draft so I modified the file to add more height to the mm lines. You can see a before and after with my FDM Elegoo Neptune 4 Pro. I was able to…
I have two of these cheap, metal, unbranded Vernier callipers, and wanted to create a Gridfinity holder for both, plus 4 batteries. Instead of wasting a print on someone else's design that doesn't fit this model, I decided to waste about…
Use Base Single Hole Mount to attachment this mod
Vernier Callipers, Gridfinity bin These should fit most callipers but for reference mine are: Moore & Wright 110-15DBL There are loads of bins for callipers. Unfortunately none of them were suitable for my bin, so I made my own. These…
Vernier throttle for flight sim Arduino code avilable here : https://github.com/p0lysim/VernierThrottle
This is a simple add-on to any dynamics physics cart that has magnets that are spaced 1-7/8" apart. Lines or notches can be made on the chassis so that you can align the knob to repeatable speeds for tests. Current design has a pocket for…
Simple apparatus to help measure radius on 90° edges, with a vernier caliper. This size can measure between 4mm-20mm. I needed to measure the radius on various phones and tables, and found out there was no simple solution, so i modeled…
CHECK OUT THE VERSION 2!!!! I wasn't impressed with the standard Vernier Track ends, so I designed these! They are designed with a slot in the center, for a cart launcher, which I also designed. There is also an option to add the magnets…
I redesigned the cart picket fence flags for my carts. They are cheap, easy to make, and work well! You can use any type you want, and especially have students measure the flags and set up the photogates themselves. These are also a great…
This is just a quick remix of a remix of the Bracket vernier calliper (Peg mount) ( https://www.thingiverse.com/thing:2866877 ) by ArneBanane I updated a 3rd version to add some more clearance for the head of the screw used to install it…
This is an adapter for your Vernier Physics carts, so they can be launched with a spring. I printed mine in PETG with supports on the build plate. Springs can be purchased on Amazon, I have been using these: link to amazon You will also…
For multiple labs I find myself tying string to the carts and making the string too long or short. Finally got around to designing these so I can make sets of string depending on the lab to the string length matches what I need and cut…
One layer, two tools, a small station at every corner and edge of the bed. At each station T1 prints next to T0, and you read how far apart they landed, in X and in Y. The same gap everywhere is a plain offset; a gap that changes across…
Laser pointer mount for optics experiments. For mirror set, visit Mirrors for optics experiments
I'm a STEM tutor and am currently designing an affordable set of designs for an at-home physics experimental course. This is a first piece in series, the angle mount for optics experiments. Model consists of two parts: the main dial and…
Very simple holder for a vernier caliper which slots on to the side of a Stanley small parts organizer (1-93-978). Did not verify but should also be compatible with Stanley 980-93-1. Printing Recommendation: Orient on either side and…
I love my Vernier Tracks for my Physics classes, but I found most of their equipment didn't meet my needs. I hang my tracks on the wall using bookshelf supports. But when the original feet were left on the tracks, it made it hard to stack…
One of my biggest complaints about the Vernier tracks, was the plastic track ends that came with our tracks. One thing I wanted was a slot in the middle for running a string through, but I also wanted the ability to add the cart tabs, and…
I was inspired by another model on this site, which converted an older style force sensor to a scale, so I decided to design my own for the Go Direct Force Sensor. It should work well with the provided plastic screw and the hex fitting on…
This is a spacer to fix worn-out locking mechanism on Polish VIS vernier calipers. Possibly resizable for other vernier calipers as well. Install as pictured by first separating the caliper parts. Can't do it wrong.
Keep your INSIZE digital vernier caliper neatly organised and easily accessible with this custom-designed 3D-printed holder, made to fit an IKEA Skådis pegboard. The holder is designed to accommodate the caliper's shape, with a dedicated…
If you are like me, you have probably lost these, or just simply do not have enough! Since they are just a plastic part, I figured why not take a shot at making a design. Since I am already designing so many models for my Vernier…
This model adapts the Vernier Dual-Force Sensor (DFS-BTA) into a functional force plate. I made this originally for an adapted egg-drop experiment to measure impact forces from dropped objects, but it can also be used for simple weighing…
I wanted to design a bracket for the Vernier Carts, and then once I have the bracket made, I can build things on top of them. Here is the first of my ideas, which was a simple bucket, which would allow students to center load the cart,…
I know I am not the only person who desires to add more than just 4 masses to a physics cart! This bucket in the various sizes can be used in order to add additional masses, including any kind of masses, not just the hexagonal masses to…
I wanted a way to stick a motion detector to something metal like a locker or whiteboard. When I realized I have so many of the Vernier magnets for the dynamics kits, I realized I should design it with them in mind! Feel free to print as…
Made the mount specifically for my 16mm thick vernier caliper. Specially designed so that vernier caliper can't fall out. Dont hesitate to ask me for other file formats like (obj, 3mf, etc…)
This versatile Caliper Holder is designed to fit the Gridfinity system and perfectly accommodates a Digital Caliper. It also features additional slots for an extra battery, Micro SD card, USB, and Glue Stick, making it a highly functional…
For my (pricy) Mitutoyo vernier caliper which came in a plastic cover I designed this wallholder or rugged sheath. It provides the right cavities for a really good snug fit It is printed in PETG, 10% lightning infill and supports…
Simple mount to store verier on a wall. I used double sided tape to fix it.
This model adapts the Vernier Dual-Force Sensor (DFS-BTA) into a functional force plate. I made this originally for an adapted egg-drop experiment to measure impact forces from dropped objects, but it can also be used for simple weighing…
150mm Electronic Vernier Callipers Storage Case. The fit allows adding a felt layer that finished it off beautifully.
The main part is missing? No, it is not ;-) I did not want to steal the clicks from the original designer on this very nice design. Therefore I published only the slider here, which I did myself. Please get the the ruler from the original…
I liked Jonathan's design, and it fits my Mitutoyo calliper well, though upside down. This turns it over (right way up) with a slightly higher box at 7U and provides for a wider range of callipers. (My digital ones didn't fit the long…
Gridfinity Mitutoyo 150mm Vernier Caliper + OLFA SVR-2. Split into two parts for printing on small printers
One of my biggest complaints about the Vernier tracks, was the plastic track ends that came with our tracks. One thing I wanted was a slot in the middle for running a string through, but I also wanted the ability to add the cart tabs, and…
I designed this as I am always using my verniers at work and home, but never get round to putting them back into their cases to keep them protected. They just end up left on my desks where on day someone is bound to knock them off. This…
CHECK OUT THE VERSION 2!!!! I wasn't impressed with the standard Vernier Track ends, so I designed these! They are designed with a slot in the center, for a cart launcher, which I also designed. There is also an option to add the magnets…
Vernier caliper holder mount. Printed in Tpu95A. 20% Infill. 55 minutes. Print with support.
Made the mount specifically for my 16mm thick vernier caliper. Specially designed so that vernier caliper can't fall out. Dont hesitate to ask me for other file formats like (obj, 3mf, etc…)
This version use centimeters (1cm) as base unit The vernier side is therefore scaled to 0.9cm increments to keep the upscale valid Provides 0.1cm precision
Print with PETG Infill 90% No Support Required
Vernier's oxygen gas sensors have to be stored upright and are designed to store in the square 250 mL Nalgene bottles they come with. I've found that they're a little top heavy and tend to topple or just get bumped around my shelves. So I…
I occasionally need to measure items bigger than 150mm to 0.1mm accuracy, so I attempted this steel ruler conversion to see how well it works and I was quite pleasantly surprised at the result.
Case for vernier caliper model 530-104 with magnet close. 5x3mm magnets. Does not fit in mi ender 3 bed plate , printed in bambulab x1c. Printes in petg, but pla works great. I Use a old umbrella rod, but any 1,5mm rod works.
This print will show you how far out of square your printer is. It accurately measures up to 1mm of deviation between the X=Y and X=-Y directions. When running a CoreXY printer it's very important that your belts are evenly tightened.…
Simplified indicators for the inner part of the bevel protractor. Easier on the eyes to have a single indicator at 0.
This versatile Caliper Holder is designed to fit the Gridfinity system and perfectly accommodates a Digital Caliper. It also features additional slots for an extra battery, Micro SD card, USB, and Glue Stick, making it a highly functional…
For my (pricy) Mitutoyo vernier caliper which came in a plastic cover I designed this wallholder or rugged sheath. It provides the right cavities for a really good snug fit It is printed in PETG, 10% lightning infill and supports…
This is a case for mitutoyo vernier caliper and similar. Original case is very bad. You will need 8 M3x40mm CHC bolts Fix 220² print bed (K1 or ender3)
Prints in two parts and needs gluing them together, just make sure to only glue the outer measuring part of the caliper in order to allow free movement to enter the caliper.
A 6x1 Gridfinity bin designed to hold the case for the Amazon calipers. This bin is designed to hold the box and calipers that I purchased through the following link:…
This is a vernier caliper wall mount, designed to hold your measuring equipment on the wall and keep your workspace tidy. For bigger calipers like a 1 metre long one, I suggest printing 3 and for any that are smaller 2 will do it. I used…
Vernier depth gauge Vernier depth gauge is used for measuring the depth of holes, recesses and distances from a plane surface to a projection Remember its a 3d printed tool, accuracy is limited. Feedback is much appreciated!
Insert for Vernier Micrometer instead of digital Print Settings: Printer: Prusa Mini + Material: PLA or TPU Infill: 10% gyroid
Very simple holder for a Mitutoyo Vernier Caliper mod. 530-101, designed for the IKEA Skadis pegboard. There are 2 different files, one for the caliper front and one for the back. The holders snap in place and they print without supports.
![[PythonSCAD] Vernier bevel protractor with simplified indicators](https://media.printables.com/media/prints/1164590/images/8773593_7a6f09dc-3a57-439a-b953-9e1c4ab40ac8_2f110c75-6368-4bba-811c-7e080de4c8d9/capture.png)
