1 / 2
Feet for Vernier Physics Tracks
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I was always annoyed by the Vernier Track feet, so I redesigned them so they do not stick out.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 13
- Makes
- 0
- Views
- 79
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution — Noncommercial
I love my Vernier Tracks for my Physics classes, but I found most of their equipment didn't meet my needs. I hang my tracks on the wall using bookshelf supports. But when the original feet were left on the tracks, it made it hard to stack them side by side. I redesigned the feet so they no longer stick out past the width of the track. This also helps sliding photogates and other equipment onto the track.
You will need:
- 2 ¼" square nuts to hold the feet into the model
If you don't have the Vernier feet:
- 1 ¼" by ½" bolt to hold the feet to the track
- 2 ¼" by 3" or more bolts to serve as feet. (I would cover them in rubber)
- 1 ¼" square nut to hold the feet to the track.
Enjoy!