Vernier Calipers
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.86 – €1.05 net (excluding VAT)
For file: slider_0.25n_0.1mm_PLA_MK3S_1h20m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.95 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 1.33 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
3D printable vernier calipers 0.1 mm precision
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 169
- Makes
- 0
- Views
- 1,147
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
I designed a set of calipers that allow for measurements of 0.1 mm precision.
The calipers have all the normal bits: internal and external measurement arms as well as a depth gauge.
The scale allows you to read up to 0.1mm, but the accuracy is dependent on your print quality.
The slider has a hole for a tension screw or heat insert for a bolt.
Printing Instructions
- Use the smallest nozzle you have available.
I designed this with the intention of using a 0.25mm nozzle. I have not tried it with a 0.4mm nozzle. - 0.2 mm first layer, 0.1 mm layer height.
- No supports needed.
- Use tags to hold down the sharp corners if you have bed adhesion issues. There's an example in the photos and 3MF files.
- DO NOT USE BRIMS OR RAFTS. Those are a pain to remove later. I know from bitter experience.
Feel free to give some feedback on how I can improve the model.