Counting matching models…
I got tired of opening my "precision stuff" drawer only to find that the battery had once again died on my calipers. Off I went to Onshape, and a few iterations later I had a good design. I figured I would share it, only to see that…
The original pin did not work for me. It usually broke off when trying to insert it. This is a new pin that is more sturdy and that works well with the original model. Best printed in PETG, 0.4 mm nozzle, 0.2 mm layer height, 2-3…
Snap on holder for a pair of calipers, designed for the Ender 3 V3/V3 Plus. Can be printed with pretty much any filament, it's just a cosmetic choice.
THE PROBLEM: OLD FRAME VS. NEW BRAKES I designed this part to replace the missing original cable guide on my 2013 Kona Satori. When upgrading to modern Shimano BR-MT420 4-piston brakes, I discovered that on almost all modern Shimano…
This is a depth gauge attachment for iGaging Origincal digital calipers. I gave my son mine and purchased another with the OEM depth gauge. My son wanted a depth gauge also, so I designed this. I printed in PETG but any filament should…
I made a wall with magnetically held marking and measuring tools directly above my main work/marking bench. I find that being mostly a power tool woodworker, measuring and marking tools need to be in easy reach. If my 500mm ruler is in a…
General Made for Mitutoyo digital calipers, my model number is: "Mitutoyo 500-196-30". It prevents any accidental button presses, because they don't rest on the case. You technically could technically still activate it with the roller,…
A radius gauge to fit Mitutoyo digital calipers. This version has a 106.3 degree included angle for the arms which allow the caliper reading to be simply multiplied by 4 to get the radius and is suitable for measuring object radii up to…
Introducing QuickCheck Calipers – your handy tool for nailing measurements on the fly! Small enough to stash in your pocket, these bad boys deliver quick and accurate readings in a snap. And get this – they're printed with an ultra-tiny…
It is a simple design, print two of the hand and use the washers with a single 3 mm screw to hold everything together. Fusion 360 source model included for easy remix
A split version of gridfinity caliper holder, which can be printed on smaller format printers
Introduction I wanted a Gridfinity bin for holding my calipers in an Ikea Alex drawer but also me smaller in footprint. I found a model online but it was for regular calipers and I prefer these Neiko's that are consider “jumbo” screen. It…
Printed with 0,1 high PLA Face down + Support for the grooves messschieber schieblehre schublehre schiebelehre
I made a simple holder for my calipers. What more to say ? :D The model is meant to be printed sideways with tree supports. Printed on Bambulab A1, 0.4mm nozzle, 0.2mm layer height.
This is a holder for your calipers so you can hang it on your skadis board.
Calipers holder for common vernier and digital 150mm / 6" calipers. Fits most calipers with a body width of up to 38mm (approx. 1½ inches.) Can be printed lying flat without any support without trouble. Can also be printed upright with…
i made a holder for all my measurement tools. i felt like they were always under something or in the wrong place. it holds the measurement tools from the harbor freight kit. As well i added the hexbit holder and 2 pockets for small stuff…
Relatively very easy-to-make calipers. Inspiration came from the battles I've fought attempting to get other models to print well. Maybe a skill issue on my end but alas. Some things I still want to improve upon are: Increase overall tool…
replaceable sponges for vernier calipers 2-3, with a 3 mm sweep hole. it is used for accurate marking of large parts
This is a replacement battery cover. It's different than the original cover but works just fine to keep the battery in place. I printed this one in glow-in-the-dark PLA (because why not), but any PLA or PETG (re-sliced) should work fine.…
These are bins designed specifically to hold Mitutoyo digital calipers for Zach Freedman's Gridfinity system. I designed them around models 500-195-30 (4"), 500-196-30 (6”), and 500-197-30 (8”), but they may also fit other brands or…
Two of these caliper jaw extensions, fitted to your analog or digital calipers, allow direct measurement of the distance between two hole centres without any calibration or calculation. As demo-ed in my YouTube video: This is the STL as…
This is a remix of: Easy AAA Battery Calipers Mod by Fyreguy https://www.printables.com/model/499393-easy-aaa-battery-calipers-mod Replace a 357/303 1.5 V watch battery with a long lasting AAA. Ideal for cheap calipers with poor battery…
A simple remix of Drew's excellent model to support both of my most used design tools Here is the TinkerCAD link if you want to further modify the design: https://www.tinkercad.com/things/k0HsyWvG3AR-gridfinity-caliper-xacto-holder-v2
This is an updated version of a model I created previously. Those who made the old ones complained of it being too loose, so I created slightly tighter tolerances to ensure the model has a snug fit, and maintains its position when removed…
This is a AAA battery holder for Pittsburgh calipers. You no longer need to buy coin cell batteries that die too quickly. This is friction fit and you do need to remove the bottom portion of the battery wrapper so it can complete the…
Hello! Here is a remix of zolo2hin's caliper mount -- I added two pegs for durability and adjusted size for better fit. I printed the mount on the face of the pegs with tree supports (see pictures) in order to have the best surface…
When “Good Enough” is OK and you need to measure something your caliper can't accommodate. Extended Jaws for Kynup cheap Amazon Digital Caliper. 75mm and 100mm versions. Print these jaw down, on a smooth build plate. When installed they…
Potters can use golden ratio calipers to enhance the aesthetic appeal of their pottery pieces. By incorporating the golden ratio into their designs, potters can create visually pleasing and harmonious proportions. Here’s how potters can…
Calipers that are used to find the center of an object. They have a max opening distance of nearly 18.5" The smaller legs need to be printed with support material. These calipers require the following hardware: 1x 8-32 x 5/8" Button head…
I had been using a stand that held calipers and other tools horizontally but it really took up too much space. This is a compact vertical stand that holds calipers, a standard 12 inch (300mm +) metal ruler, a 15cm plastic ruler, a fillet…
Jooa97 's Gridfinity insert for calipers was my favorite I could find on Maker World, so I modified it slightly to fit my cheap basic Workzone (Aldi brand) calipers. To do so, I made the space for the thumbscrew bigger and extended the…
This add-on for most calipers is used for holding flat items, such as watch jewels or gemstones, while measuring.
Quick flow test. Better than Orca's tests in which it's hard to find that best block. Set the base flow of the filament to 1. Print and match the C-shaped element to the squares. The elements must not be too loose. Don't force them in…
I plan on adding a scale for easier measuring. For the assembly you need: 1x M8 rod 5cm long 1x M8 nut 1x M8 Sleeve nut with a outer diameter of 10mm 1x M8 Washer
Gridfinity bin for 150mm Insize digital calipers, designed to look like the foam insert found inside the OEM case, with an added Insize logo for flair. This design cannot be stacked upon, as the overall width of the calipers means it…
I designed this to hold Mitutoyo Digital Absolute Calipers 150mm or 200mm (6" or 8") It may work with others, I have only tested the Mitutoyo ones Shout-out to TJDesign for the Skadis hook interface, I reused his hook as found on his Wera…
Print in the vertical standing position with supports.
Tldr; how to use it Design or print one of my pre-rendered models, the one with r=2d is most similar to Thyn's original design. In this equation, d is the distance measured by the calipers, and r is the radius of the object (note: radius…
This printed well with or without supports. I used ¼"-20 setscrews. I printed from PLA with 8 walls just to make it stiffer. Any feedback is appreciated.
Quick flow test. Better than Orca's tests in which it's hard to find that best block. Set the base flow of the filament to 1. Print and match the C-shaped element to the towers. The elements must not be too loose. Don't force them in…
I thought this design by Turbopstros was a much better design than most of the ones I'd seen, mostly because it uses a lot less filament. However, I didn't like the empty space underneath, and thought perhaps it could be raised up a…
Every model, except for the hook, needs the backing peg to be mounted. The hook model functions as holder for the small plier Everything can be printed without supports
More details at https://www.parktool.com/en-us/product/3-d-printable-pegboard-holder-for-digital-calipers-dc-h3d
A specialized Gridfinity holder for two tools essential to 3D printing – digitial caliper and deburring tool – for those who like to make use of every inch of space in their drawer. New to 3D printing, I decided my first printing project…
3D printable callipers for quick on the go measurements that don't require ultra high precision. Print with a 0.2mm nozzle. I used PETG for its strength, but other materials would work too. Print the depth gauge separately, and use a…
At some point we all print a helmet or something that we need to custom fit and so we turn to Uncle Jessy's cosplay calipers. I too did this and while they worked, after setting them down they eventually bent under their own weight. So I…
Do you work in a workshop where people keep using your calipers or do you just want to mod them? Then this tool is for you. This print in combination with the templates helps you perfectly align common 150mm Mitutoyo (530-104) calipers in…
This ruler's cross section is 19 mm x 1 mm. The ruler is part of a set ( https://www.amazon.com/dp/B01BG78ZW0 ). Print Settings Printer Brand: Monoprice Printer: Select Mini V2 (E3D) **Rafts:** Doesn't Matter Supports: No **Resolution:**…
Adapters that snap on regular 1/8" thick caliper jaws to allow measurement of thin features. Groove and thread depth measuments while machining. Works better with digital calipers due to their zero function, install, calibrate the new…
Print a mirror for the second one. It's a tight fit so the 3mmx6 screws and heat inserts are not required. Recommend using tree supports with the point up.
I am in the process of reorganizing my desk, and needed a place to put my Digital Calipers. A long time ago I received these as a Christmas gift. While I still have the original plastic box with the foam, when I leave that on the disk, it…
Gridfinity module for my callipers and the spare batteries they come with. These are the inexpensive callipers I use that fit nicely. Filament Companies That Support Me: FlashForge: PLA / PETG / ASA / CF Filaments Cookiecad: PLA / PETG /…
I had to split the tray up in order to print it. I am not sure if my calipers were a tiny bit longer or if by splitting it I lost a few millimeters, but I would suggest double checking to ensure the tray is going to fit or you may need to…
Turn a simple Ace Hardware meter/yardstick into a large set of calipers. I used a measuring stick from Ace, but any other similarly sized stick should work. The fit is pretty tight at first, but with a little use or additional…
Simple model for Caliper Battery Lid. It's based of the model of ChengLung https://www.thingiverse.com/thing:343287. I changed the lugs to make them more robust and shorter to make it more sturdy. Also I added a slope which makes the lid…
A Gridfinity 2x2 x6U bin to hold both a digital and an analog caliper Single LR44 spare battery hole. Included .step file for easy modifications
This models holds all the tools that come with the Core One and a folding rule safely. It also holds some calipers, but not as securely. It's good if the stand just stands there, but it's not designed for action. While this is not a…
Well, it does what it says, stores calipers and writing tools (2xSharpie/Pen + 2 Edding markers and 3 normal size pencils on the back ) within reach. Weighs about 100 grams, print in under 2 hours Material : PLA Layer H : 0.12-0.32 mm…
Use the this nut as the link
This ruler clip is designed for a 6" machinists' ruler such that you can lay it flat on a sheet of paper and slide it around. It fits a 3/16" diameter magnet, but this can be modified in the Solidworks file or the STEP file. If two of…
Here is my Cosplay Caliper tool I designed after seeing Nikko Industries awesome video explaining how he made his with foam. I figured I'd take that same concept and make it 3D Printable. I've also shared the Tinkercad file. Feel free to…
An easy retrieval IKEA Skådis bracket for most types of 12 inch calipers (including Mitutoyo 500-193-30). Should fit similar sized generic 12" digital calipers as well.Should fit similar sized generic 12" digital calipers as well. T-Clips…
A joint calipers is a simple tool to get the measure of a part, then transfer that measurement over to a ruler to get a number. This one is sized for a 220x210mm print bed. It's all in OpenSCAD so it is easy to modify to suit yourself.…
Tired of your calipers getting lost in the clutter? This pegboard-mounted holder provides a simple and secure way to keep your precision measuring tools within easy reach. Designed to accommodate most standard calipers, this holder…
This small tool attaches to the depth gauge of a standard size caliper (16mm wide) to create a radius gauge. The depth reading is linear with the radius: the caliper reading needs to be multiplied by 2.41 (which is sqrt(2)+1) to get the…
I didn't design these with heat inserts because just a finger tighten on the screws is good enough.. Might have to run a tap through them.. One side of one block is countersunk to hold the tubing from flopping around… Just slide a piece…
Use to add a roller to your digital calipers. The holder is specifically sized to fit onto the General UltraTech No. 1433 (3") calipers, but should also fit the No. 146 (6") calipers which appear to use the same slider assembly. The wheel…
Gridfinity Holder for PITTSBURGH 6 in. Digital Caliper from Harbor Freight in case. For reference, the case I designed this for is 26.5mm thick by approximately 248mm long. Printed on Ender 3 Pro 15% Infill PLA No Supports
3D printed calipers accurate to 0.5mm. Prints without support and goes together without glue or fasteners. There is a video that shows how to print and assemble your calipers. Assembly is simple, everything just drops in place and snaps…
This was made to take measurements of thermal pads easier. This is made to fit on 3MM calipers
I'm looking to get into designing wearables and needed some calipers to measure body parts. when looking for them i didn't find any i liked that locked into place. So i quickly drew some up in blender that i was satisfied with. Nothing…
This is a case for a Mitutoyo 500-196-30 model (number is embossed on the lid) digital calipers. I printed the case and lid with 100% infill, and the insert 5 % infill. You will need to bore out the printed holes to 3mm and insert rods as…
This is a box insert with a cut out for the General Ultratech Calipers. The insert dimensions are 237.5 mm x 101.6 mm x 19.05 mm. The box in the photo is this ( https://www.printables.com/model/258431-rugged-box-parametric ) with the…
This is a pretty straightforward 2x6 Gridfinity bin for storing the Hardell 6" calipers. The only downside to this model is that you can't stack more bins on top of it. However, I'm including the original CAD file in case anyone happens…
The essential measurement tool, now tiny! Guaranteed to only stab you a little bit if you put it in your pocket. Prints best with no support, flat on the build plate.
Scaled to fit Centauri Carbon and solidified for strength
A hook designed to hold calipers. Category: Organization
I got tired of opening my "precision stuff" drawer only to find that the battery had once again died on my calipers. Off I went to Onshape, and a few iterations later I had a good design. I figured I would share it, only to see that…
The bracket is attached to the calipers by undoing the set screw, clipping on the bracket and reattaching the set screw through the little hole on top. The set screw remains functional, as do all buttons. The part holding the U-Wave…
These are Gridfinity inserts for 150 mm Mitutoyo Calipers. Instead of printing a specific bin for calipers, you can print a standard 2 x 6 gridfinity bin and use these inserts to hold the calipers. This way, if needed, we can later use…
Calipers designed for helping with sizing cosplay props like helmets and armour. Model has the arms split in half to be able to fit on print-beds of smaller sizes (up to 350mm arm-length on a Mini). Bolt & nut style mounting peg for…
Recommended print settings: Material: PLA or PETG Layer Height: 0.2 mm or less (3MF file contains variable layer height). Infill % : 15+ Supports: No Print Orientation: Default as modeled Brim: No
A radius gauge for finding the corner radius of items. Can measure radii from 0 to ~100mm. Also included is a quick-reference label that can be printed on a DymoLabel printer, and stuck on. Rename the label file to “.label”, as…
The original pin did not work for me. It usually broke off when trying to insert it. This is a new pin that is more sturdy and that works well with the original model. Best printed in PETG, 0.4 mm nozzle, 0.2 mm layer height, 2-3…
Snap on holder for a pair of calipers, designed for the Ender 3 V3/V3 Plus. Can be printed with pretty much any filament, it's just a cosmetic choice.
Snap-fit Calipers Attachment for A Ruler Easy to attach to a ruler. This is a re-remixed thing from, "Caliper add-on for Westcott Stainless Steel Ruler" by EyeOfOdin what remixed from "Calipers, attachiment for a ruler" by danielsoltis .…
THE PROBLEM: OLD FRAME VS. NEW BRAKES I designed this part to replace the missing original cable guide on my 2013 Kona Satori. When upgrading to modern Shimano BR-MT420 4-piston brakes, I discovered that on almost all modern Shimano…
Digital Calipers are great. What's even better? Digital calipers that you can do whatever you'd like, electronically, on the output line. Combined with some pins, a level shifter to go from 1.2v to 5v for the logic, and an Arduino (or…
Wanted a good storage location / solution for my digital calipers so designed this bracket. This was designed for the storage case on the Mitutoyo 500-196-30 calipers. I use 3M VHB tape on the back but add a screw just to make sure it…
A two color 6x2x4 Gridfinity bin for the Mitutoyo 500-196-32 digital calipers. I put the metal battery cover clip under the handle. Included an .f3d if you want to remix or just want the profile. and a 3mf file to go straight into the…
This is a depth gauge attachment for iGaging Origincal digital calipers. I gave my son mine and purchased another with the OEM depth gauge. My son wanted a depth gauge also, so I designed this. I printed in PETG but any filament should…
