Radius gauge attachment for Mitutoyo digital calipers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Radius gauge suitable for larger radii, with simple calculation to find radius.
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 41
- Makes
- 1
- Views
- 196
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
A radius gauge to fit Mitutoyo digital calipers. This version has a 106.3 degree included angle for the arms which allow the caliper reading to be simply multiplied by 4 to get the radius and is suitable for measuring object radii up to 200mm. It also can be fitted with 6mm X 3mm magnets to hold the calipers in place, For an accurate measurement, the calipers must be pushed firmly against the stop. Also after printing the edges/corners that the end of the caliper bar abuts may also need to be cleaned out from any overextrusion to get an accurate reading. I recommend testing against a known radius to check this. I used PLA with 30% infill.