Radius gauge attachment for Mitutoyo digital calipers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Radius gauge suitable for larger radii, with simple calculation to find radius.
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 41
- Wydruki
- 1
- Wyświetlenia
- 196
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
A radius gauge to fit Mitutoyo digital calipers. This version has a 106.3 degree included angle for the arms which allow the caliper reading to be simply multiplied by 4 to get the radius and is suitable for measuring object radii up to 200mm. It also can be fitted with 6mm X 3mm magnets to hold the calipers in place, For an accurate measurement, the calipers must be pushed firmly against the stop. Also after printing the edges/corners that the end of the caliper bar abuts may also need to be cleaned out from any overextrusion to get an accurate reading. I recommend testing against a known radius to check this. I used PLA with 30% infill.