Digital + analog calipers wall stand + accesory space
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Within reach every time you need it
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 16
- Makes
- 0
- Views
- 89
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
Well, it does what it says, stores calipers and writing tools (2xSharpie/Pen + 2 Edding markers and 3 normal size pencils on the back ) within reach. Weighs about 100 grams, print in under 2 hours
Material : PLA
Layer H : 0.12-0.32 mm
Perimeter count : 3
Infill : 7-10%
Nozzle D : 0.4-0.8mm
Color: of your choice
Scalable : Yes (can be scaled in depth ( Y axis ) if your calipers stem is thicker than 3.8mm)
There is space left for a 8x5mm magnet on the back slot, to the right , because the digital caliper I have tends to fall easy due to weight of the display. You can just negative shape the size of magnet you prefer and pause the print at height to install it.
Already in the correct orientation.