265 models
This is a remixed project of the Mitutoyo Micrometer Battery Cover by GreatOldOne . After printing the original design by GreatOldOne, to replace a broken Battery Cover for our 1-2” Mitutoyo Mic. I noticed that the fit was not as I…
A mounting bracket designed specifically for a Mitutoyo Digimatic Caliper. It likely could be used for other calipers as well, but you might need to adjust the position of the posts so that they hang vertically as the Mitutoyo does. This…
Simple replacement key for your miutoyo caliper for when you need to change the battery.
Designed to print-in-place without support. 0.2mm layer height works well. If you'd like to print the inner part in a softer material like TPU, the step file can be split into 3 parts in the slicer, with a separate lower insert. Tested…
Adjusted the design from @seb_241995 to fit Mitutoyo calipers with the side scroll wheel. Fits perfect !!
Designed to print-in-place without support. 0.2mm layer height works well. I printed mine out of PLA and it fits snug without play. If you'd like to print the inner part in a softer material like TPU, the step file can be split into 4…
I'm not a fan of wasted time or material so I remixed this Mitutoyo 6 in caliper holder to save on both. There is still a small storage bin in the bottom to hold extra batteries or anything else of a similar size. Change log v1 (…
Basically Remix from https://www.printables.com/model/432569-digital-caliper-case-mitutoyo/comments. Added more space for Thumbwheel and changed the text font. Tested on Mitutoyo 500-196-30.
These are bins designed specifically to hold Mitutoyo digital calipers for Zach Freedman's Gridfinity system. I designed them around models 500-195-30 (4"), 500-196-30 (6”), and 500-197-30 (8”), but they may also fit other brands or…
I used 2 pcs of M3x5 insert nuts and M3x6 countersunk hex screws for assembling the holder and hex insert.
I really liked the original design of this but I wanted to make a version that didn't need any hardware to mount it.
I kept the base from Brian.Kuo's model but made the connectors to the Skadis board slightly shorter and narrower. This means they ‘should’ print to fit straight out of the printer. Reworked the entire front from scratch. It's a hanging…
To assemble you'll need 8 (yes 8) m3x40 and the same number of m3 nuts or nylocs. The insert is separate so you could print in a different filament (e.g. TPU) if you want. The plan is to put some foam or another rubber insert in the top…
Original Fusion files included Printed on a Prusa mini in Polymaker PLA This work was based on other opensource work, and may inherit their license. Micrometer: https://amzn.to/3WaB8pG My other Gridfinity Designs: 1/8" Endmill Holder:…
Compatibility This bin is compatible with the 150 mm Mitutoyo Digital ABS AOS Caliper . Other calipers might fit but were not testet. A PDF file is included, that can be printed at 100% scale to verify the pocket shape and size before…
Extension for Mitutoyo caliper gauge (Tiefenmesser) made for MITUTOYO Digital Absolute 150 mm IP67 Input / idea came from @jackenhack but this 3D model does not fit to mine Mitutoyo caliper gauge, so I need to redesign the full model new.…
Stand for Mitutoyo Caliper, or other similar brands. Needs some gluing. Based on: https://www.thingiverse.com/thing:4807344
Can be printed on smaller printers. Step file included. V2: Added different heights.
Replacement Mitutoyo micrometer battery cover. All of my digital micrometers where purchased second hand of eBay, and they all had chewed up covers to their battery compartments. This is modelled after what I believe is the most recent…
This design is based on the original product (reference 050083-10 ) and is specifically made to fit the 500 series Mitutoyo calipers. It is also compatible with calipers that have a 16x3.5mm blade. The model is designed to fit neatly…
This is an upgrade from my old caliper case design. It works and it prints in one piece if you own an MK3 All you need is : 2 neodymium magnets 3x8mm 2 screws for the hinges (I used 2 headless allen screws) I've done some modifications on…
Adjusted the design from @seb_241995 to fit Mitutoyo calipers with the side scroll wheel. Design with Mitutoyo Logo and different deeps for colors. First color change 0.6, second at 1.2 Fits perfect !!
Remixed from the first Mitutoyo caliper holder from the OG . Fits 293-340-30, but might fit others.
This is a remix of the rugged frog box from thingiverse designer Nibb31 . I designed a TPU insert for the case which holds a Mitutoyo digital micrometer and has a spot for 3 sr44 batteries. You'll need 8-M3x25 screws and 8-M3 nuts. You…
Used the model of the indicator from McMaster Carr. Fits quite well, makes me feel better about storing this precious tool. Ended up printing with 0.6mm given simplicity of model.
I will print it soon, by the way it needs : 2 M3 worm bolts around 1cm 2 neodymium magnets 8mm diameter with 3mm thickness. The new version is better because it prints in two parts without supports and doesn't need any glueing like the…
This holder was made for Mitutoyo Dial indicator, Ø38 casing diameter, for mounting on Anycubic Kobra 2 Pro, for checking the bed level Printing parameters: Layer Height: 0.2mm; Perimeters: 3; Solid Layers: 3; Supports: Yes (Tree); Brim:…
Case for Mitutoyo N15 530-101.
As the name implies: a gridfinity holder for the Mitutoyo 293 Micrometer.
This is a case for the Mitutoyo 543 (-390B) Digimatic Indicator series. The lid and the bottom are connected using two pieces of filament. There are two versions of the lid - one flat (Lid.stl), and one with the logo and model embossed…
A no-support needed 3D print for a Mitutoyo 6-inch AOS (500-196-30) Caliper Depth Gauge Base / Bridge. Printing Printed with Silver Prusament PLA on MKS+. Print with the widest flat part down to get the most accurate measurements, it will…
The CD-15CWW is an older type of caliper. The existing cases can become unusable due to aging and wear, so I designed this case. It is designed to protect the important mechanical parts from external shocks. There is also a storage space…
Created using Zack Freedman's Fusion template: https://a360.co/3ccHbsg Copyright (c) 2023 Zachary Freedman and Voidstar Lab LLC
A 6x2 Gridfinity box for the Mitutoyo MIT530-104 Vernier Caliper.
This is a relatively simple open-top case for storing an old-style Mitutoyo 0-1" micrometer, to keep it handy in the toolbox while preventing it from banging around the other tools. Note that this was designed to form fit a specific…
I printed with SLA 3d printer for a good result. youtube video: https://youtu.be/F84rsRMOOS4
I needed a depth measuring bridge for my Mitutoyo (500-181-30 CD-15APX) caliper. Because the original one is expensive I design my own. There are a lot of bridges out there to print, but I wanted a design which is adjusting the caliper to…
This design follows the approach used by Mitutoyo for their 156-105-10 stand. Their base is narrow and uses the weight of the steel part to keep it stable. I started with their approach, but the light weight plastic would tip over to one…
mitutoyo battery cap for digital indicator
A compact case for Mitutoyo 500-196-30 or CD-6" ASX caliper. Need 2 M2*20 screws and 4 cylindrical magnets with 6mm diameter and 5mm height.
A simple battery cover for the MITUTOYO 500-181-30 Digimatic as I haven't found one online. This is for the calipers without the scrolling wheel. Printed in PLA, 0.1 layer hight. Fits like a glove for me, but a bit fragile in the small…
i couldn't find a cad of this micrometer so i made one have fun
This is a simple microscope objective case I designed to fit Mitutoyo M Plan Apo and similar objectives. There is enough room to house pretty much all 95mm parfocal length objectives and the box is wide enough to fit Excelitas high…
A 3x8x3 gridfinity bin for the Mitutoyo CD-8" PSX calipers, remixed from the excellent version by @ andrepadua .
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! Hello Everyone I designed a magnetic case for the MITUTOYO Absolute AOS Digimatic Caliper 150 mm (500-196-30) – the…
This remake is version 2 of my Caliper Wall Holder - Mitutoyo 150 mm.
Printed in PLA to perfectly fit my Mitutoyo digital micrometer model 293-340. Allows safe measurement of delicate watch parts like pivots, etc., that would be risky with a handheld micrometer. Added an angled version (white) which makes…
Mitutoyo 342-351-30 0-1" Point Micrometer Gridfinity Bin
A Gridifinity tray to hold a 52mm Mitutoyo dial indicator with a Lug back.
It's not stackable, but very easy to pick up the caliper. Dimension is 1x6
Sheath for the Mitutoyo 182-207 (150mm/6") steel rule - or similarly dimensioned rules (12.05mm x 152.45mm x .40mm). Non-affiliate Amazon link: https://www.amazon.com/dp/B0002795AM One model for PLA/PETG/ABS/ASA , this design was intended…
Mitutoyo 293-332-30 2-3" Digital Micrometer Gridfinity Bin
Stand for 300mm vernier calipers - remixed
Mitutoyo caliper stands, cubic and triangular. Mitutoyo is a name in accuracy and quality. Print with any, 0.2LH, any infill. Use felt stick on pads on the interior/bottom to soften the hold. You could pause the print half way and fill it…
Stand for Mitutoyo Caliper and ruler (or just the caliper if you prefer) I use this to keep my ruler and calipers handy as they get used often. One version has the rules and calipers and the other version is just the calipers
Printed with TPU 95/A from a .8 nozzle at .4 layer height.
English This holder is a minimalistic approach to mount the Mitutoyo IP67 Caliper to the wall. In my case I mounted it inside a steel cabinet by using double sided tape (works so far). If you want, there are 2 screw holes in it, if you…
Battery cover for my mitutoyo digital micrometer as mine was lost. Print Settings Printer: FLSun I3 Rafts: No **Supports:** No Resolution: .1 or less **Infill:** 50 Notes: small threads on this part, sometimes hard to print. Category:…
Gridfinity compatible bin, 1x2x4 units, filled, with cutout for a Mitutoyo 513-404-10 Dial Test Indicator, with 40mm face and standard probe tip. Probably fits other 40mm DTI's as well, but that's untested. Pockets for the included 8 mm…
GRIDFINITY MITUTOYO MICROMETER TRAY 25-50MM PT 293-612 3x5 INC CAD MODEL
For: 0.14mm 0,001mm 513-401-10E MITUTOYO 0,80mm 0,01mm 513-404-10E MITUTOYO
Elevate your precision workspace with our Mitutoyo Micrometer Work Desk Holder. Securely mount your micrometer for easy access, enhancing efficiency and accuracy. Upgrade your work desk with this essential component of our bracket system,…
Gridfinity holder for Mitutoyo 543 dial test indicators.
This mount is designed to receive a dial indicator with an 8mm shank, you will need two M5 screws and nuts for clamping.
The original creator's design is great, however it was a bit too short for my calipers so I had to extend the length a bit. I also added storage for 8x6 = 48 precision screwdriver bits (4mm), as well as small cutouts for four LR-44…
Created for the Mitutoyo 129-127 depth micrometer. 3x5 gridfinity grid. Small storage compartment with lid for micrometer wrenches and small hex key that accompanies the depth micrometer.
1x3 Gridfinity bin for Mitutoyo 8in Caliper. Remixed from Gridfinity Caliper Holder by Zach Freedman.
I somehow fell into the gridfinity hole late but now I have to make it perfect. I am still on it to designing and printing new specialized boxes for tools and equipment but my absolutely favorite one had to get one early. It holds the…
This is for mounting the micrometer on a tool wall. I used M3x14 but you can use shorter ones.
Gridfinity Mitutoyo Dial Indicator 38mm Tray
Gridfininity for Mitutoyo dial indicator (2416A). This should fit all standard mitutoyo 1" dial indicators. Updates Recreated the model with a number of changes: Changed the rear lug hole to a cavity to allow rear lug attachments such as…
This was designed as an adapter for a Mitutoyo caliper. It uses the depth rod to calculate the radius. Once the adapter is attached to the caliper, use a known true flat surface, extend the depth blade and zero the caliper. It is now…
I made this to supplement the fact that while my indicators were not cheap, the packaging they arrived was.
designed it today with 4 goals - a sturdy base but de-bulked aperture, a positive stop to ensure proper seating and maintain alignment, a ridged base to ensure effortless removal and and indexing mark for measuring from the objective end…
Gridfinity compatible bin, 2x3x4 units, filled, with cutout for a Mitutoyo 2050AB-19 dial indicator, with flat back and 20mm travel. Probably fits other models, but that's untested, so YMMW. Finger grip pockets, spare volume used for a…
DDD Wall Control mounts for the Mitutoyo QuantuMike Series 293 micrometers. Includes all models required from the original project for a complete mounting solution. Currently, this includes: 0-1" Mitutoyo 293-185-30 1-2" Mitutoyo 293-186-30
Replacement ratchet knob for Mitutoyo micrometer. Use 0.3 nozzle or smaller and reduce outlines to a single outline for easier printing. Or, use Arachne settings to achieve thin extrusions.
Replacement micrometer cases for Mitutoyo 0-1" model 103 micrometers. Designed for Laney College Machine Technology Dept. Model is print in place, features a swing latch, cutouts for a micrometer and adjustment wrench, and has stacking…
This is a remix that contains holder for 2 Mitutoyo Calipers 530-312 and 500-196-30. Fits both in 1 x 6.
Mitutoyo Test Dial Indicator (513-402-10T) Gridfininity 3x2 Box This should fit all(non-long range) horizontal Mituyoto Test Dial Indicators. This model includes space for the accessory kit.
I noticed that there are a number of Gridfinity trays out there for the Mitutoyo 0-1" micrometers, but very few for 1-2" and 2-3". Additionally there are relatively few Gridfinity-based designs for Kennedy's machinist toolboxes; the main…
For the no longer produced Mitutoyo 522-602 Parallax caliper, designed this as I have a very cramped working desk and the plastic pouch included with the caliper was not so good to store it. Big, Long and sturdy this case does the job The…
Battery cover for Mitutoyo height gauge
Mitutoyo 547-500S Snap Gauge Gridfinity Bin
Handy dark-field illuminator that fits Mitutoyo microscope objective. Can be adjusted for any other objective with a different WD. LED should be chosen so that it has a quite narrow emission angle for the dark-field illumination to work…
I lost the battery cap for my 500-322, 200mm (8 inch) Mitutoyo digital vernier caliper. Without the battery cap, the caliper kept shutting off. My patience ran out, so I remixed this design from another cap I found on Thingiverse (the…
I made a simple holder for my Mitutoyo radius gauges. It specifically fits model numbers 186-105, 186-106, and 186-107. My Print Settings: Nozzle: .6 (Brass) Layer Height: .30 (Quality) Infill: 10% Filament: Overture PLA (Red/Black) Hot…
This is a small threaded plug that allows you to pull the reticle from Mitutoyo toolmaker microscopes. Threads were guestemated as M17x0.5, but are likely some crazy mix of imperial diameter and metric thread pitch. It worked for me… YMMV
Gridfinity holder for Mitutoyo 3046S dial test indicators.
Printed it with a 0.4 nozzle at 0.16 layer height with PLA, does what it needs to do. Printed it upright so the hole stays round
Gridfinity holder for Mitutoyo 2971 dial test indicators.
I have been trying to free up as much space as possible on my Secretlab desk. Figured this would free up even more space and give it a neat little place to store them. I used this on my Secretlab Magnus Pro desk, but I would imagine it…
2x3 Gridfinity tray designed for Mitutoyo 513-404-10A, others may also fit. Printed with PLA.
Do you work in a workshop where people keep using your calipers or do you just want to mod them? Then this tool is for you. This print in combination with the templates helps you perfectly align common 150mm Mitutoyo (530-104) calipers in…
Microscope Nosepiece / Turret / Revolver Adapter for Mitutoyo FS70. Ideally it should be machined out of stainless steel, but it should work as a polymer print too (use strong filament and settings for high strength though). The grub…
Mitutoyo 182-207 150mm scale holder with built in PTFE cutter.
Created a 0-1" Mitutoyo micrometer container; it will only fit the standard silver, the green has too many odd edges to make both fit well without them bouncing around. It is standard gridfinity height 4.
Small, sleek Mitutoyo Calliper Desk Mount Hardware: 2x Size 6 Button Head Screws (or use a screw that has a head < 7.5mm, through hole < 4mm) Prints with the text up, Supports are required.
throw some vhb on the back of this and stick it where you want your calipers to hang. Doubles as a bird.
Improved Version for the Mitutoyo 150mm 0,02mm Caliper 3x 5x3mm Magnets are needed
