Mitutoyo Caliper Wall Mount
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.27 – €1.55 net (excluding VAT)
For file: Mitutoyo Wall Mount_0.3mm_PLA_MK3S_1h17m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.41 excluding VAT (range midpoint).
- Weight reported by the author
- 20 g
- Print time reported by the author
- 1.29 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A wall mountable bracket to hold a Mitutoyo Caliper
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 20
- Makes
- 0
- Views
- 116
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
A mounting bracket designed specifically for a Mitutoyo Digimatic Caliper. It likely could be used for other calipers as well, but you might need to adjust the position of the posts so that they hang vertically as the Mitutoyo does.
This bracket is designed to maximize convenience; you just gently lift and pull the caliper off the posts.
I used to have my Mitutoyo hanging from a hook next to the 3D printer, but it was in danger of being knocked to the floor, and these are expensive calipers so I decided to make something a little safer yet still handy to grab at a moment's notice.
It has recessed screw holes to reduce the chance of rubbing metal on metal when hanging or retrieving the caliper. The square holes are simply to reduce the amount of filament needed.
Hopefully this will be useful to others who need to grab their caliper many times a day!
EDIT: May 14 2025 - nudged right post up 1 mm