Gridfinity Mitutoyo Radius Gauge Holder
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€4.30 – €5.26 net (excluding VAT)
For file: Gridfinity Radius Gauge Mitutoyo Holder_0.6n_0.3mm_PLA_MK3S_3h20m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.78 excluding VAT (range midpoint).
- Weight reported by the author
- 90 g
- Print time reported by the author
- 3.33 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Gridfinity holder for Mutitoyo radius gauges.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 16
- Makes
- 0
- Views
- 149
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I made a simple holder for my Mitutoyo radius gauges. It specifically fits model numbers 186-105, 186-106, and 186-107.
My Print Settings:
Nozzle: .6 (Brass)
Layer Height: .30 (Quality)
Infill: 10%
Filament: Overture PLA (Red/Black)
Hot End Temp: 215 (Prusa Preset)
Bed Temp: 60 (Prusa Preset)