Mitutoyo 522602 Magnetic Caliper Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For the no longer produced Mitutoyo 522-602 Parallax caliper
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 20
- Makes
- 0
- Views
- 414
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
For the no longer produced Mitutoyo 522-602 Parallax caliper, designed this as I have a very cramped working desk and the plastic pouch included with the caliper was not so good to store it.
Big, Long and sturdy this case does the job
The magnets i had at hand are of size 6 x 3 mm and they keep it closed very well.
You can cut a letter a 2mm thick foamy sheet at the size of the caliper case upper hole for a tight fit.
-Printed in PETG
-Infill depends of the material but i used 20% gyroid because it looks cool
-0.2mm layer height (I would recommend print at variable layer height as there ate many monotone layers)
-No supports but you need to place the top case with the logo touching the build plate
-Magnets of size 6 x 3 mm IMPORTANT, YOU NEED TO CALIBRATE YOUR PRINTER IN ORDER TO COMPENSATE THE HOLE EXPANSION AS THE DESIGN HOLES ARE EXACTLY 6 X 3 mm. I used shoe glue to keep them in place