Mitutoyo 522602 Magnetic Caliper Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For the no longer produced Mitutoyo 522-602 Parallax caliper
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 413
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
For the no longer produced Mitutoyo 522-602 Parallax caliper, designed this as I have a very cramped working desk and the plastic pouch included with the caliper was not so good to store it.
Big, Long and sturdy this case does the job
The magnets i had at hand are of size 6 x 3 mm and they keep it closed very well.
You can cut a letter a 2mm thick foamy sheet at the size of the caliper case upper hole for a tight fit.
-Printed in PETG
-Infill depends of the material but i used 20% gyroid because it looks cool
-0.2mm layer height (I would recommend print at variable layer height as there ate many monotone layers)
-No supports but you need to place the top case with the logo touching the build plate
-Magnets of size 6 x 3 mm IMPORTANT, YOU NEED TO CALIBRATE YOUR PRINTER IN ORDER TO COMPENSATE THE HOLE EXPANSION AS THE DESIGN HOLES ARE EXACTLY 6 X 3 mm. I used shoe glue to keep them in place