1 / 2
Micrometer Case 0-1" Mitutoyo Print In Place
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement micrometer cases for Mitutoyo 0-1" model 103 micrometers. Designed for Laney College Machine Technology Dept
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 23
- Makes
- 0
- Views
- 144
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
Replacement micrometer cases for Mitutoyo 0-1" model 103 micrometers.
Designed for Laney College Machine Technology Dept.
Model is print in place, features a swing latch, cutouts for a micrometer and adjustment wrench, and has stacking feet for storage.
Both Versions are the identical except for the markings.
Printing:
Main Assembly is Print in place
Recommended Print settings
| Supports | None |
| Material | PETG |
| Layer Height | 0.2mm |
| Infill | 15% gyroid |
Postprocessing:
- Lubricate hinges and latching bar with 3-in-1 oil, WD-40, Ballistol, CLP or similar.
- Gently apply flexing tension on main hinge from one side of the case to break lose any minor adhesion between pintle and gudgeon
- work the Main hinge and latch back and forth until they run smoothly, applying more lubricant if necessary
- Close and latch the case, press feet into the non-chamfered matching insets on bottom of case either with a vise, press, or gently with a hammer