1 / 3
Vernier Calipers - 110 mm (Faster Printing) — image 1
1 / 3

Vernier Calipers - 110 mm (Faster Printing)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

3D printable callipers for quick on the go measurements that don't require ultra high precision.

Rating
4.333 / 5
Likes
22
Downloads
300
Makes
2
Views
909
Reviews
3

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

3D printable callipers for quick on the go measurements that don't require ultra high precision.

Print with a 0.2mm nozzle. I used PETG for its strength, but other materials would work too.  
Print the depth gauge separately, and use a small amount of CA glue to glue in place. 

Same design as the original, however I removed the hexagonal shapes, to make it all infill, as well as printing the depth gauge as it own piece to reduce the amount of support material needed. 
Overall, this account for a 27 minute reduction in print time, and a 0.8 g saving in filament. These calipers are fully compatible with the original design, so you can mix and match the two.

As stated by the original designer, these are accurate to +- 0.2 mm, and good for quick measurements that don't require precision.

 

Tags