Label Tag (Parametric)

This is a parametric 3D printed label tag designed for hardware or parts organizers - perfect for neatly labeling each compartment in your storage box.
It’s a simple yet extremely handy solution to keep your workspace organized and professional-looking.

• Fast to print - only about 2 minutes per label tag (8x20 Label)
• Easy fit - clips securely onto organizer dividers without glue or screws.
• Optimized geometry - minimal material use and no supports required.
• Printer-friendly - tested with standard PLA
• Parametric design - label length, width, and organizer wall thickness are adjustable in the CAD file.

I used 10x20 and 8x20 labels for my KISTENBERG ORGANIZER NOR12, 290x195x35 mm. I used white plastic labels cut to dimention. Writing with a marker directly on the tag didn't work well (the marker got absorbed into the printout).

Recommended Print Settings (Used 0.20 BALANCED Prusa):

• Nozzle size: 0.4 mm 
• Layer height: 0.2 mm 
• Material: PLA / PETG 
• Supports: None 
• Print time: ~2 min per tag 
• Infill: 15% (or even 0% if your slicer bridges well)

Make sure the layers are printed in 1-2 Movements without joints in straight sections.

Parametric Model

The model is fully adjustable, so you can easily adapt it to fit different organizer wall thicknesses, label widths, and label heights.