Label Tag (Parametric)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Parametric 3D printed label tag designed for hardware or parts organizers. Optimized geometry - minimal material.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 1
- Views
- 38
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a parametric 3D printed label tag designed for hardware or parts organizers - perfect for neatly labeling each compartment in your storage box.
It’s a simple yet extremely handy solution to keep your workspace organized and professional-looking.
- Fast to print - only about 2 minutes per label tag (8x20 Label)
- Easy fit - clips securely onto organizer dividers without glue or screws.
- Optimized geometry - minimal material use and no supports required.
- Printer-friendly - tested with standard PLA
- Parametric design - label length, width, and organizer wall thickness are adjustable in the CAD file.
I used 10x20 and 8x20 labels for my KISTENBERG ORGANIZER NOR12, 290x195x35 mm. I used white plastic labels cut to dimention. Writing with a marker directly on the tag didn't work well (the marker got absorbed into the printout).
Recommended Print Settings (Used 0.20 BALANCED Prusa):
- Nozzle size: 0.4 mm
- Layer height: 0.2 mm
- Material: PLA / PETG
- Supports: None
- Print time: ~2 min per tag
- Infill: 15% (or even 0% if your slicer bridges well)
Make sure the layers are printed in 1-2 Movements without joints in straight sections.
Parametric Model
The model is fully adjustable, so you can easily adapt it to fit different organizer wall thicknesses, label widths, and label heights.
