Sony XM6 headphone hinge repair
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Part which can be used to reinforce broken hinge ring for Sony XM6
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 303
- Wydruki
- 2
- Wyświetlenia
- 1901
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
Both rings that support the headphone extension broke due to their flimsy design. The rings flexed and eventually failed under stress.
I modeled the dimensions in Fusion 360 and designed a pair of clamp reinforcements. After installing the clamps, everything works great - the headphones themselves are still solid and the folding mechanism function is unchanged.
The parts print with minimal supports on a Sovol SV06 using generic Kingroon PLA, print time is about 10 minutes on my setup. I’ve included the G-code file.
Once printed, you’ll need a couple of small M2×20 mm bolts to clamp them in place.
Update 23.05.2026: i also added more beefier version, xm6_hinge_repair_rev3 file