Customizable Tesseract
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a fully customizable tesseract for all your tesseract needs. Customize the post radius, outside box size and…
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 376
- Wydruki
- 4
- Wyświetlenia
- 1717
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution
This is a fully customizable tesseract for all your tesseract needs.
Customize the post radius, outside box size and inside box size with OpenSCAD or Customizer.
This can be used as a Marble Trap! See this page for more information.
Also known as a Hypercube.
*not an actual tesseract, this is the 3D shadow of a 4D tesseract.
Download the OpenSCAD model or customize on the Thingiverse page https://www.thingiverse.com/thing:2863814 .
Print Settings
Printer:
Anet A8
Rafts:
No
Supports:
No
Resolution:
0.1-0.35
Infill:
10%
Notes:
You may need to clean up stringing after this print.
If you use Cura, or a slicer with similar setting, enable Z Hop under Travel so the nozzle doesn't get caught on the posts, sometimes they curl up.
The file name refers to the outside and inside lengths. 57-19_tesseract.stl is with a 57mm outside length and a 19mm inside length.
I have discovered a error in the code, it has been fixed.
The inner cube adds double the post radius to the length, so a 15mm inner cube and a 2mm radius will make a 19mm cube. 15+(2x2)=19
The remixes I have made have been deleted because of the fixed bug.
Category: Math Art