Wolf Tail for Dummy 13 / Lucky 13
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Another lil tail from my creation! Now its for all canines!
- Ocena
- 5 / 5
- Polubienia
- 114
- Pobrania
- 388
- Wydruki
- 1
- Wyświetlenia
- 1836
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Share Alike
A Wolf tail for your Dummy ! Since i didnt find a tail and wanted to make my dummy furry like i decided to make one, and there were also few people who wanted this tail! Its the simpliest design and still movable as the whole Dummy!
-Supports are needed! Im recommending Organic supports. (Since i find out a better way to print this tail) There are two types of finished G-codes with various print positions (Type 1 is recommended to print with brim). Use what works best for you, otherwise you can adjust it to your liking from 3.mf file.
- This tail is scaled on 100% Dummy13. But you can always scale it bigger.
-The tail i printed was from PLA but i highly recomment to use PETG, since i have good experiences with that material and it wont break that easily when you snap the joints together :)
-After you assemble the tail, attach it to the stand adapter. Movability of this one is kinda smaller than on cat tail, but in my opinion it has still a good move range for a tail like this.
- This is Ver.1. There might be updates on the tail in the future!
If you are insterested into these tails, i made one more → good known Cat tail, so make sure to check out that one too! <3
I would also be happy if you leave me feedback, or what I could improve in the future. Thank you!
Enjoy and Happy Printing! ^-^