Wolf Tail for Dummy 13 / Lucky 13
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.95 – €1.16 net (excluding VAT)
For file: Type1-Wolf tail Dummy 13 - 100% scale_0.4n_0.15mm_PLA_MINIIS_1h18m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.05 excluding VAT (range midpoint).
- Weight reported by the author
- 8 g
- Print time reported by the author
- 1.3 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Another lil tail from my creation! Now its for all canines!
- Rating
- 5 / 5
- Likes
- 115
- Downloads
- 390
- Makes
- 1
- Views
- 1,849
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution — Share Alike
A Wolf tail for your Dummy ! Since i didnt find a tail and wanted to make my dummy furry like i decided to make one, and there were also few people who wanted this tail! Its the simpliest design and still movable as the whole Dummy!
-Supports are needed! Im recommending Organic supports. (Since i find out a better way to print this tail) There are two types of finished G-codes with various print positions (Type 1 is recommended to print with brim). Use what works best for you, otherwise you can adjust it to your liking from 3.mf file.
- This tail is scaled on 100% Dummy13. But you can always scale it bigger.
-The tail i printed was from PLA but i highly recomment to use PETG, since i have good experiences with that material and it wont break that easily when you snap the joints together :)
-After you assemble the tail, attach it to the stand adapter. Movability of this one is kinda smaller than on cat tail, but in my opinion it has still a good move range for a tail like this.
- This is Ver.1. There might be updates on the tail in the future!
If you are insterested into these tails, i made one more → good known Cat tail, so make sure to check out that one too! <3
I would also be happy if you leave me feedback, or what I could improve in the future. Thank you!
Enjoy and Happy Printing! ^-^