1 / 5
Scarlett 2i2 (ALL GENS) monitor stand platform with cable hooks — zdjęcie 1
1 / 5

Scarlett 2i2 (ALL GENS) monitor stand platform with cable hooks

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Focusrite 2i2 (ALL GENS) monitor stand platform, reversible (mirror) for left and right mounting.

Ocena
0 / 5
Polubienia
1
Pobrania
14
Wydruki
0
Wyświetlenia
123
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Audio
Licencja
Creative Commons — Attribution

Focusrite 2i2 (all generations!) monitor stand platform with cable hooks, reversible (mirror) for left and right mounting. Depending on your generation the 2i2 may sit a little loose inside the platform, if you would like a snug fit it should respond well to resizing in your preferred slicer.  Please refer to the chart in photos for exact sizing, keep in mind the dimensions on the chart include the knobs.  The photos are of my gen 1 and gen 3 2i2s to show approximate fit if printed as-is.The photos are of my gen 1 and gen 3 2i2s to show approximate fit if printed as-is.  This model does not include the monitor stand pole mount, the one I used is here:

https://www.printables.com/model/644712-pole-mount

The platform attaches with a single long screw to the monitor stand pole mount.  PLA seems to hold the weight of the Scarlett 2i2 well.  1 degree of upward slant has been built into the mating face to account for any weight sag over time.

Tagi