Scarlett 2i2 (ALL GENS) monitor stand platform with cable hooks
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Focusrite 2i2 (ALL GENS) monitor stand platform, reversible (mirror) for left and right mounting.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 14
- Makes
- 0
- Views
- 123
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution
Focusrite 2i2 (all generations!) monitor stand platform with cable hooks, reversible (mirror) for left and right mounting. Depending on your generation the 2i2 may sit a little loose inside the platform, if you would like a snug fit it should respond well to resizing in your preferred slicer. Please refer to the chart in photos for exact sizing, keep in mind the dimensions on the chart include the knobs. The photos are of my gen 1 and gen 3 2i2s to show approximate fit if printed as-is.The photos are of my gen 1 and gen 3 2i2s to show approximate fit if printed as-is. This model does not include the monitor stand pole mount, the one I used is here:
https://www.printables.com/model/644712-pole-mount
The platform attaches with a single long screw to the monitor stand pole mount. PLA seems to hold the weight of the Scarlett 2i2 well. 1 degree of upward slant has been built into the mating face to account for any weight sag over time.