Counting matching models…
Ideal for more permanant installations to reduce cable clutter. Designed with short right angle male to female connectors in mind. The version with_slot adds an additonal cable slot to route cables, e.g. keyboard/mouse usb under the unit.…
The Focusrite Scarlett 2i2 (4th gen) has a circular volume LED around the input 1 and 2 inputs. At the time of this file's creation, there is no software solution for disabling it. This knob was designed to block out that light. This knob…
Supporto per scheda audio Focusrite 4i4 3rd gen, consigli riempimento 30% almeno. Possibilità di inserire il supporto sotto una tastiera.
Simple under desk mount for the Focusrite Scarlett 4i4 4th gen. Needed parts: either the ventilated or the unventilated main body the front plate 2x either the big or small screws Additional parts needed: 4 wood screws for attaching the…
Ideal for more permanant installations to reduce cable clutter. Designed with short right angle male to female connectors in mind. The version with_slot adds an additonal cable slot to route cables, e.g. keyboard/mouse usb under the unit.…
Desktop Stand for the Focusrite Scarlett Solo 4th Gen
Focusrite Scarlett Solo 3rd Gen cover for those who hate red color=)
You can use this model to mount you FOCUSRITE SCARLETT 2I2 under the table. Category: Music
May need to stick on some rubber feet, can slip around a bit while turning knobs/plugging unplugging leads
The Focusrite Scarlett 2i2 4th Gen is a lovely USB audio interface with an iconic look! However, the red metallic chassis doesn't fit in with every aesthetic around it. In my case, I was building a digital piano setup, and the original…
Remixed this Focusrite Scarlett 2i2 under desk mount so that it uses Multiconnect slots to mount instead of the screw holes. Printed with the same orientation as the original, and no supports needed. I printed this in PETG, which has…
Desktop stand - 30-degree tilted version for Focusrite Scarlett Solo 3rd Gen. Second, Smaller version: https://www.printables.com/model/1794623-focusrite-scarlett-solo-3rd-gen-hellraiser-v2 Cutouts: For 2 large jacks and thick cables For…
The Focusrite Scarlett 2i2 (4th gen) has a circular volume LED around the input 1 and 2 inputs. At the time of this file's creation, there is no software solution for disabling it. This knob was designed to block out that light. This knob…
Simple veritcal mount for Focusrite Scarlet solo 4th gen. sound card.
I originally used two of my initial remix to hold the audio interface up. It eventually stretched out the brackets and fell out. The single, center hole design of the original bracket doesn't seem to do well with heavy and/or wide…
A custom made rack to fit the Focusrite Scarlett 4i4 4th gen. In combination with a charger, a usbc hub and a ethernet dongle. This makes all the port accsessable on the backside as XLR chassis connectors. Requires som soldering. Tried to…
Simple feet that can be added to the Scarlett Solo First Gen to move it up from the table a bit. I use it to get the controls of my desk lamp below it, as you can see in the picture. You can probably use it for a ton of other stuff. With…
I needed a mount for my scarlet 2i2 to declutter my desk, so I drew up this design, intended to mount wit 4 countersunk screws. The audio interface slides in and is held in place through a tight friction fit, sturdy enough to not move…
A vertical stand I made for my gen 4 Scarlett 2i2! Made to be stable while visually unobtrusive. :) Doesn't cover the XLR or USB ports on the back regardless of its orientation. You can add rubber feet under the base if you want to get…
I recommend printing this mount on its rear face, with the release tab facing upwards and some tree supports for the tab, as shown in the model photos. The mounting holes are sized for #6 screws.
Under table mount for Focusrite Scatlett 2i2 (4th gen). Also for bigger versions as you can place brackets as you want to.
Pick up any screw from the hardware store that fits the holes and goes deep enough into the desk. I found 3-4mm past the other side is enough for a tight and secure placement. Print on the side and use organic supports.
I "upcycled" a sound card from Focusrite (broken one, power layer HS). Fit to the raspberry pi 3. I designed it to place my octoprint server + 12v/5v converter + switch to control the 12vLED light of my printerbox and the raspberry pi. A…
This is an under desk bracket for the Scarlett Solo 3rd Gen. 4x #4 countersunk screws XLR cable clip is 6.5mm wide Print with support everywhere with back the side, where the cable clip is, down.
Friction fit 10 inch rack mount for Focusrite Scarlett 8i6
I wanted to mount my Scarlett Solo Gen3 to my Multiconnect system rather than screwing the box into my desk. I remixed this to support that and added a backstop to prevent the device from sliding backwards.
See “Differences” below for more information
A quick and dirty model that worked for me - I wanted a friction fit, so it is tight. Insert Focusrite at your own risk. Some more notes: Only for Focusrite Scarlet Solo Gen 4 - USBC You must remove the rubber feet before inserting the…
The original models tolerances are way too lose for my printer, so the interface is slipping out of the slot, even with the stopper piece. Therefore I remade the stopper piece, but with a slope up to +2mm to the original in the back. This…
This angled stand is designed for the Focusrite Scarlett 16i16 USB audio interface. Improved visibility: Tilts the unit 15° for better viewing of input meters and front panel LEDs at desk height. Cable-friendly: Raises the interface…
No supports needed, printed in Pla with ender 3 printer.
This holder is to neatly mount your Focusrite Scarlett 2i2 under the desk in a vertical orientation.
This is remixed from mirasderbissalin's desk mount to support a 1" desk and a 3rd Gen Focusrite Scarlet Solo. The desk fit is a little loose, has some space for a 3M command strip although it hasn't been needed. Print Settings Printer…
Underdesk solution for the focusrite solo. the feet of the solo are a bit too shallow to actually hold it in place. have to add a bit of doublesided tape or rubber underneath to ensure it doesn't pull out when disconnecting the headphone…
A riser for the Focusrite Scarlett Solo 3rd Gen that tilts the audio card for easier access with cable management. Multiple versions of the riser are included if you don't want to deal with multiple parts like bottom, top, buttons and…
A simple under desk mount for the Focusrite Scarlett Solo
I needed a mount for my Focusrite Scarlet Solo 4th Gen to declutter my desk. The audio interface slides in and is held in place through a tight friction fit, sturdy enough to not move when inserting/removing an instrument cable, but loose…
I needed a mount for my Focusrite Scarlet Solo 4th Gen to declutter my desk. The audio interface slides in and is held in place through a tight friction fit, sturdy enough to not move when inserting/removing an instrument cable, but loose…
I needed a mount for my Focusrite Scarlet Solo 4th Gen to declutter my desk. The audio interface slides in and is held in place through a tight friction fit, sturdy enough to not move when inserting/removing an instrument cable, but loose…
Do you leave your audio interface powered on 24/7? If you have the Focusrite Scarlett 4i4 (4th Gen) in a bedroom or a dark studio, the standby lights and gain halos can be distracting. I designed this low-profile cover to solve that…
This is a 1U rack mount for a Focusrite ScarlettSolo 3rd Gen audio interface along with a fan controller found on Amazon. You will need to take the rubber feet off the bottom of the audio interface for it to fit.
Supporto per scheda audio Focusrite 4i4 3rd gen, consigli riempimento 30% almeno. Possibilità di inserire il supporto sotto una tastiera.
A under desk mount for my old Focusrite Scarlett 2i2 and my new FiiO K13 R2R. I realize that pretty much no one will have this exact combo, but since one of my viewers asked for it, I figured I just might upload it. Especially for those…
Simple under desk mount for the Focusrite Scarlett 4i4 4th gen. Needed parts: either the ventilated or the unventilated main body the front plate 2x either the big or small screws Additional parts needed: 4 wood screws for attaching the…
Under-table mount for Focusrite 2i4 2nd gen audio interface This is a remix of the 2i4 bracket by DJERO . The design has been modified to be printable on the side, and require no supports. Printing on the side should also make the tabs…
Protect your Focusrite Scarlett Solo 3rd Gen with this custom-designed full cover. The enclosure helps shield your audio interface from dust, scratches, and everyday wear while maintaining a clean and professional appearance on your desk…
Extended the length of the original author's creation to accommodate a full 1U traditional rack space. Printed with Elegoo petg on my Elegoo CC1. I printed it at a lower infill but I do recommend you print it with a higher infill for…
Remix of yom 's desk mount for the Focusrite Scarlett Solo Gen 3 desk mount, modified to fit under a Realspace Zentra glass desk from Office Depot. Just snaps onto the front bar. Not quite as sturdy a typical mount with screws (sturdy…
An under desk mount for the Focusrite scarlett solo gen 3 (might also fit other gens but idk) with a headphone hook.
This is a edit of Ziller88's design. His file for 1st gen has the incorrect foot-groove size and would not work with 1st gen devices (Serial number's starting with S) If you don't know what generation your device is, see this link:…
A simple bracket to hold a 4i4 Audio Interface to the bottom of a desk. Has recessed 3mm holes for a variety of screws.
Free up desk space by moving the chonky Clarett+ 4Pre under your desk 20% infill and some supports(that take a long time) should work in almost any material Category: Other The mount is tilted just over six degrees so plugs will clear…
I had my focusrite velcroed to the underside of my desk; but it kept falling off. So, I made this holder. It's designed to use the velcro-style removable double-sided adhesive mounting tape. Print instructions I printed mine in Prusament…
the Scarlett Solo table attachment 3D print fits perfectly under any table, whether screwed or glued in my case(acrylic)
This is just a model I made for my own purposes, maybe you find a use for it. The mount I used previously was quite flexible, not secure, and everytime I plugged something in, it moved. So I drew up another one with focus on sturdiness…
print two times on the flat side Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Filament: Prusament PETG Category: Audio
Je ne trouvais pas de supports pour les Focusrite Scarlett 2i2 3rd Gen donc j'en ai fait un car ce modèle est bien plus petit que ses prédécesseurs. Je me suis inspiré de ce support https://www.thingiverse.com/thing:3647280 pour faire…
ITA: Tutti i file devono essere stampati due volte, tranne "MixerStand-3" che deve essere stampato in 4 copie. Per le parti laterali capovolgi il modello nello slicer in intrambi i lati e in modo da non aver bisogno di supporto. Consiglio…
WARNING This is a rough first design of a vertical desk mount for the Focusrite Saffire Pro 24 DSP audio interface. It's also meant to be screwed into the desk - if you decide afterwards to remove it the holes are left. If you remove…
La caja está diseñada para transportar la tarjeta de sonido Focusrite Scarlett 2i2, pero también es válida para la Scarlett solo, dentro cabe la tarjeta con su soporte y bolsa de tela. Está diseñada para poner la tarjeta en la parte…
This is a snug fit for the Clarett/Clarett+ 2Pre (including its rubber feet) and the latches hold the interface firmly in place. So it's no problem to plug in/out an XLR cable with one hand. Yet, after disconnecting the cables on the…
Support à fixer sous un bureau ou un plan de travail pour la carte son Focusrite Scarlett 2i4 2nd Gen et 2i2 2nd Gen Je voulais un support qui me permette de sortir la carte de son logement en cas de besoin. Attention, les languettes sont…
Soporte para tarjeta de sonido Focusrite Scarlett 2i2
Design This model is for securing a Focusrite Scarlet 8i6 underneath a desk or to a wall. There are various alternative designs but I wanted one that stopped movement forwards and backwards and both sides connected across the bottom, so I…
Designed an easy-to-print under-desk shelf mount for my Focusrite Scarlett Solo interface. I printed mine out of PLA and mounted it with 3M VHB tape. My particular desk has a 20mm square metal frame under the top shelf, so this hangs low…
I found several existing mounts for the Focusrite Scarlett Solo (3rd Gen), but all of them had some fancy locking mechanism and/or required supports to print properly. More importantly, it looked like all of them were too close to the…
A under desk mount for a Scarlett Solo. Includes ports on the back for the USB c and the ¼in Ports.
Does not require support material Print with back face (power cord plugin area) on the print bed
A minimal angled desk stand for the Focusrite Scarlet 4i4 so the knobs are a little more accessible and visible. 15cm wide by 10cm deep Can be used for other Focusrite devices as well. Feedback is welcome! Updated Version 2 Uses far less…
Template to help with mounting Focusrite Scarlett 2i4 2nd Gen bracket
A vertical stand with a perfect fit for the Focusrite Scarlett Solo. Free some space on your desk !
My knobs became sticky as the plasitic started to break down. So I made a replacement for them. This is a replica Knob for Focusrite Scarlett 2i4 (First Gen). Might fit other Focusrite Hardware aswell. Feel free to leave a comment, if it…
Hallo Freunde der Audiotechnik, anbei gibt es STLs und G-Codes für einen Focusrite 4i4 (3rd Gen) 9,5Zoll Rack Halter. Ihr braucht für ein komplettes Set folgende Teile: 2mal Rackmount 2mal Stabilisierer Top 2mal Stabilisierer Down…
The push button of my Focusrite Scarlett 18i20 MKI broke of. Only replacement parts for MKII were available so I created an MKI version. Not extremely elegant, but it works. Possible enhancements in the future: little more rounded top and…
If you have the oddly specific combo of a 4i4 interface and O2 amp, use this to mount them under your desk. The mount has end stops in the back so that the units stay put when plugging stuff in, and don't slide around. It also has a few…
Remix of the original model to support the different size and foot/input locations on the Gen 4 Scarlett Solo
I peeled the rubber bumpers off the bottom and attached them to the case itself. You would have to do this if you want the audio interface to fit in the case. Its snug enough for it to not slide around. very easy to take off if needed…
printed in PLA It took ~13h to print holder + screws on MK4, used the tree supports with front side facing down
This bracket is designed to attach your Focusrite Scarlett Solo sound card under your desk, keeping it out of the way. It's best suited for desks about 1 inch thick.
Includes 3 patterns of enclosure and 1 base. Included 3 patterns because I am using mine on a wall mount and decided I wanted to be able to see the red part through. And Hexagons! Initially I tried another focusrite solo mount from…
Designed a desk mount for my Focusrite Scarlett 6i6 audio interface. The idea was to move it below the desk, to reduce the number of cables running across my desk. This thing comes with 1 model (bracket) that needs to be printed 4 times,…
Focusrite 4i4v4 under surface mount with screws. I left a little space for soft velcro to cushion it. If you don't use that, take about 1mm off the mounts. I included a pattern to drill holes with
CHOOSE WHAT YOU LIKE: A single complete piece / two parts Choose if you want your Scarlett to be removable or not - also a few options on how removable Additional cable holders with various sizes Honeycomb may save print material I…
This bracket has mounting holes compatible with the Balolo mounting grid, but of course you can also screw it to the underside of a desk. Easy to print, PLA is fine, no supports required.
I printed mine with Ender 3, 0.8mm nozzle, PETG Fusion model has inside dimensions as parameters so it can be easily modified. Rubber pad holes are not parametric though.
I printed it in PETG on a 0.6mm nozzle at 0.4mm layer height with supports for the fillet of the screw wing. It's very snug - it does not budge when pulling out an audio cable. Print it in the direction of the STL as the back has an inset…
Holder for mounting your Focusrite Scarlett Solo 3 under the Desk. The Solo 3 can be inserted after mounting the holders under the desk. Dimensions: Height: 45,5 mm Width: 24 mm Length: 57 mm Hole diameter: 3 mm Print instructions Layer…
Remix of @Christoph_79778 's Scarlett 2i2 mount, widened to match the dimensions of the newer 4th Gen.
A bracket to mount the Focusrite Scarlet 2i2 3rd gen. audio interface under the desk top. It has countersunk screw holes, but can also be attached with hot glue or double-sided adhesive tape, the only question is whether the latter will…
Under-desk mount for the Focusrite Scarlett Solo audio interface, mounts with either 3M double sided adhesive tape, or with screws up to 3.5mm in diameter. The mount consists of two pieces which are mirror images, both pieces print…
The Focusrite Scarlett Solo/2i2 4th Generation seem to have no way to disable or dim their status LEDs. If the unit is in a bedroom and the computer is never shutdown, this presents a problem. This is just a basic cover to snap on when…
Support to hold the focusrite scarlett solo 4gen sound interface under the monitor
A simple under desk mounting solution for the Focusrite Scarlett Solo (4th Gen) audio interface. I couldn't find any solutions that I liked for mounting, so I designed my own! This is also designed using Zoo's modeling app ! The included…
I made this to install it under my desk. 0.2mm tolerance on every side, works great. 3mm diameter countersink holes, I used 4mm screws
