Focusrite Scarlett 4i4 (4th Gen) LED light shield
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple snap-on visor to cover the bright front-facing LEDs on the Focusrite Scarlett 4i4 (4th Gen), for always-on setups
- Rating
- 4 / 5
- Likes
- 2
- Downloads
- 8
- Makes
- 1
- Views
- 159
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Do you leave your audio interface powered on 24/7? If you have the Focusrite Scarlett 4i4 (4th Gen) in a bedroom or a dark studio, the standby lights and gain halos can be distracting.
I designed this low-profile cover to solve that problem. It slides over the top edge of the interface to shield your eyes from the LEDs without permanently modifying the hardware. It uses a friction fit to stay in place — no tape or glue required — and is designed to leave enough clearance so you can still adjust the gain knobs and volume controls comfortably.
Print Instructions
Material: PLA or PETG (Matte Black PLA is recommended for the best aesthetic match).
Layer Height: 0.2 mm.
Infill: 15%—20% (it is a small part, so infill doesn't matter much).
Supports: None
Brim: None
Installation instructions
Simply slide the cover over the top front edge of the interface. It should sit flush against the faceplate. To remove, just lift it off.