1 / 2
[REMIX] Filament Feeding Dry Box Port (Blanking Plug)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
0,78 € – 0,96 € netto (bez VAT)
Dla pliku: Port-blank_0.4n_0.2mm_PLA_MK4SMMU3_35m.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,87 € netto (środek widełek).
- Masa podana przez autora
- 17 g
- Czas druku podany przez autora
- 34,8 min
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
A blanking port that can be used to plug a hole while reusing previous parts.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 75
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Filament Feeding Dry Box Port (Blanking Plug)
Requirements:
Original model in use.
Instructions:
- Print the blanking plug.
- Disassemble the original port and retain the spacer and nut.
- Reassemble the port, but use the blanking plug in place of the port.
Photos:
Original model of the left, new blanking plug on the right.