Mini Christmas tree stand foot for small DIY projects 2g only
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mini stand that clamps small cardboard Christmas trees. Easy to print, firm hold, perfect for small DIY projects. 2g !
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 32
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
My kid wanted to make small cardboard Christmas trees as gifts. The cardboard was around 0.2–0.3 mm thick. I designed this little stand to clamp the trees securely. It holds them firmly and is extremely easy to print. Three different models are available depending on the thickness of the cardboard you use. I get the best results by slightly bending the gap open before sliding in the paper—this prevents it from crumpling.
Printing
PETG and PLA both work fine
0.15 mm structural (if you want a clean surface)
2 perimeters
5 top and bottom layers
25% infill
no supports
2g filament