Adapter_BaslerLight_100x100_v3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter to add two Basler "Light Back-100x100" lights to a Camera Mount.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 1
- Wyświetlenia
- 73
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
As an extension to Adapter BaslerCam Mount this mount makes it possible to add two 100x100 Basler Lights to the Cam-Mount.
The Adapter features pockets for Nuts so that it can be fixed to the Camera Mount and of cause meets the positions of the 4 screws considered by Basler to adapt to the Light.
Takes up a double set of the Basler Light Back-100x100 to be oriented on twi sides of the Camera.
Basler hat Back Light featuring a hole in the middle for this application - but the lens I required for my application was getting to big for the available holes, so I made this.
I split the first design into symmetrical halves to make it compatible to the my and most FDM 3D printers printing areas out there.