The Mini Trio (Mini Shell's)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Short 3 dart mini shell
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 167
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This object was printed using PLA, but it can also be successfully printed with a variety of other filament types. For optimal results, it's recommended to set the print density between 90% and 100%, which enhances the structural integrity of the final product.
One advantage of this design is that it can be printed without the need for supports, making the process simpler and more efficient. There are three options for friction: low, medium, and high. The low setting provides minimal friction, which is suitable for lower-quality printers, but be aware that the bullets may easily fall out. The medium setting is most recommended for beginners and is optimal for regular, non-harsh use. The high setting, on the other hand, is intended for those who require the best performance, ensuring optimal results. However, it requires a printer capable of high print quality and tolerances.
Updates
Changed cover photo's
Fixed model to print better and be better quality