Mounting Grid for Jaycar Enclosure HB6217
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Grid based mounting plate, sized to perfectly fit a sealed polycarbonate enclosure from jaycar (115 x 90 x 55)
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 141
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
This grid based mounting plate is sized to fit the HB6217 from Jaycar and allows for flexible and easy mounting of hardware inside the enclosure without needing to use glue, drill or cut into the plastic of the box.
I've used M3x8mm screws to secure the grid to the internal mounting points, these cut their own thread on the way in.
I'll be adding more adapter plates to this project as I design them for my own use. If you have a specific adapter plate request I'm all ears and happy to help out.
I recommend printing in ABS or other similarly heat resistant material if this is going to be deployed outside.