10" Mini rack KeepLINK 9 port 2.5G switch mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 1U 10 inch rack mount bracket for the cheap KeepLINK 9 port 2.5G network switch.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 129
- Wydruki
- 1
- Wyświetlenia
- 588
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
Switch link: KeepLINK 9 port 2.5G network switch
To use this design you require 4 M3x6mm screws.
The bracket attaches to the switch by using the M3 threaded holes that keep the sheet metal case together. You need to unscrew the short m3 screws in the switch already and attach the bracket using 4 M3x6mm screws.
The print doesn't require any supports and can be printed on most printers by putting it at a 45 degree angle on the print bed.
Please be aware the model fits great with my unit of the switch, but I do not know how much the dimensions between individual units of the switch vary so it may not be a perfect fit for you.
STL and STEP files are provided.
You can also access the onshape design for easy modification!