GratKit Dryer PTFE Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
GratKit Firefly filament dryer PTFE tube adapter.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 154
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
The GratKit Firefly filament dryer is great and Tuya connected, but lacks proper PTFE tube connections. I made this adapter for both M6 and 1/8" NPT connections. You can use any size tube (I used the standard 4mm).
For this particular build I used my Qidi Q2 with their ABS Rapido. Any suitably heat resistant and firm filament will work.
-0.16mm layer
-standard settings
-25% gyroid infill
-organic supports (see images)
To mount it, choose a location near the centerline of the dryer (avoid the display cable!). I matched up the top of the adapter to some of the mould lines. Use a rotary or other cutout tool to make a hole in the plastic cover the same size as the underside recess of the model. Get some 3M foam tape for a solid mount.
Screw in your M6 or 1/8" NPT PTFE adapter (it'll require a small wrench to tighten/clear out some print variances).
Push in your tubing, feed the filament, and get printing!