GratKit Dryer PTFE Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
GratKit Firefly filament dryer PTFE tube adapter.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 35
- Makes
- 0
- Views
- 154
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
The GratKit Firefly filament dryer is great and Tuya connected, but lacks proper PTFE tube connections. I made this adapter for both M6 and 1/8" NPT connections. You can use any size tube (I used the standard 4mm).
For this particular build I used my Qidi Q2 with their ABS Rapido. Any suitably heat resistant and firm filament will work.
-0.16mm layer
-standard settings
-25% gyroid infill
-organic supports (see images)
To mount it, choose a location near the centerline of the dryer (avoid the display cable!). I matched up the top of the adapter to some of the mould lines. Use a rotary or other cutout tool to make a hole in the plastic cover the same size as the underside recess of the model. Get some 3M foam tape for a solid mount.
Screw in your M6 or 1/8" NPT PTFE adapter (it'll require a small wrench to tighten/clear out some print variances).
Push in your tubing, feed the filament, and get printing!