Dyson Airwrap Wallmount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy printable TPU Wallmount
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 83
- Wydruki
- 0
- Wyświetlenia
- 2139
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Dyson Airwrap Wallmount
I designed this to have my Dyson Airwrap mounted to the side of our washing table.
The design enables you to use 1-2 screws (1 is totally fine, 2 needed for position locking) or an adhesive sticker or even a combination if needed.
I used two mounts that now hold the Airwrap diagonally, for ease of use.
Material & Use after two years
I printed it in a extruder TPU “hard”, so it wraps nicely around the device. After two years it has become a little looser, but holds the Airwrap still very well.
Three walls and an infill of around 15-20% gyroid is advised for a long holding power.
If you enjoy the model, please leave a quick like or make! That encourages me more than anything :)