P
PrintablesMia Germansen
Dyson Airwrap shelf
Shelf/holder for Dyson Airwrap. Can be used as a stand or hung on wall.
- Pobrania
- 1353
- Polubienia
- 160
- Ocena
- 5
Wyniki wyszukiwania: airwrap
Liczymy pasujące modele…
P
PrintablesCasper
Dyson Airwrap Shelves - Holds seven attachments
My wife needed a way to securely hold her Airwrap attachments and wasn't finding anything she liked here or for purchase so I designed and printed these. I hope they work for everyone. I printed the shelf with the hooks on it's back with…
- Pobrania
- 1324
- Polubienia
- 156
- Ocena
- 4,75
P
Printablesmnul
Dyson Airwrap wall mount
This is a simple wall mount for our Dyson Airwrap and one additional fan outlet. Due to request I've added a double-version for 2 fan outlets. Havent tested the big one myself, should fit any standard (Ender)-sized printer with a 220mm…
- Pobrania
- 1250
- Polubienia
- 147
- Ocena
- 4,38
P
PrintablesNathan
Dyson Airwrap Diffuser
This is a 3D model of a diffuser attachment designed for the Dyson Airwrap. Ideal for those looking to experiment with new accessories for their Airwrap, this model helps distribute air more evenly to enhance curling and drying…
- Pobrania
- 923
- Polubienia
- 68
- Ocena
- 4,5
P
PrintablesDuckferd
Dyson Airwrap Twistlock Station V2
This is a Dyson Airwrap wall mount station that can be used to hold the wand and 4 accessories in a simple and secure twist lock configuration. This mount consists of two parts: A wall bracket that you can fasten using your choice of wall…
- Pobrania
- 461
- Polubienia
- 52
- Ocena
- 5
P
PrintablesUnknownkwita
Dyson Airwrap Wall Mount
This is a basic wallmount for a Dyson Airwrap. The back face is flat to accomodate 3M adhesive strips which are easily removed without damaging the wall. Printed in PLA with a 0.4mm nozzle.
- Pobrania
- 353
- Polubienia
- 40
- Ocena
- 5
P
PrintablesWhenInWome
Dyson Airwrap mountable accessory holder (easy twist)
One screw in the countersunk middle hole holds the puck flat to any surface and then a 90deg left and right turn with the accessory engages and disengages the attachment mechanism to hold it firmly in place. For install I recommend fully…
- Pobrania
- 336
- Polubienia
- 35
- Ocena
- 5
P
PrintablesColdbrewdi
Dyson Airwrap wall mount - Remix with screw holes
Added two 4mm countersunk screwholes to the back of the mount. Distance between both holes: 68 mm (so they sit perfectly nice between the holders) Support is still not needed, it prints these holes w/o any problems. → Will make it myself…
- Pobrania
- 234
- Polubienia
- 19
- Ocena
- 0
P
PrintablesMichaelr91
Dyson Airwrap-Halterung
Das ist eine Halterung für das Zubehör vom Dyson-Airwrap. Diese bietet Platz für 4 Stk. Lockenaufsätze und die Föhn-Düse. Auf der Rückseite sind zwei Schraubenhalterungen angebracht. Somit sind die Montageschrauben nicht sichtbar.
- Pobrania
- 233
- Polubienia
- 61
- Ocena
- 4,67
P
PrintablesYoPrint3
Bracket for Dyson Airwrap attachments
This is a plate with 6 brackets for Dyson Air Wrap attachments. The base plate has a recess so that it fits under an IKEA "VARIERA" shelf - see pictures. Of course, it can also simply be used as a holder for Dyson Airwarp attachments. The…
- Pobrania
- 196
- Polubienia
- 15
- Ocena
- 5
P
Printablesabcd
Dyson Airwrap (NEW) Mount
This is a mount for the new version - most recent as of 2024 - of the Dyson Airwrap. The old version has different heads that might not fit as well. The model is available both in a single piece if your 3D printer is big enough, or in a…
- Pobrania
- 161
- Polubienia
- 28
- Ocena
- 0
P
PrintablesJohn Wick
Haarbürstenschutz kompatibel mit Dyson Airwrap
Haarbürstenschutz kompatibel mit Dyson Airwrap Beschreibung Schutz für die Dyson Airwrap Haarbürste, entwickelt für den sicheren Transport im Koffer oder in der Handtasche. Schützt die Borsten vor Verformung und Beschädigung.…
- Pobrania
- 135
- Polubienia
- 16
- Ocena
- 5
P
PrintablesMyst1c
Dyson Airwrap i.d. Wall Mount Holder
Keep your Dyson Airwrap i.d. neatly stored and always within reach with this wall-mounted holder . Designed specifically to fit the Dyson Airwrap i.d. handle, this holder provides a clean, space-saving solution for your bathroom or…
- Pobrania
- 97
- Polubienia
- 9
- Ocena
- 5
P
PrintablesMikuláš Matějka
Dyson Airwrap wall shelf
Shelf for Dyson Airwrap. You can use 2 sided duct tape.
- Pobrania
- 94
- Polubienia
- 18
- Ocena
- 5
P
PrintablesBENSTUBOX
Dyson Airwrap Wallmount
Dyson Airwrap Wallmount I designed this to have my Dyson Airwrap mounted to the side of our washing table. The design enables you to use 1-2 screws (1 is totally fine, 2 needed for position locking) or an adhesive sticker or even a…
- Pobrania
- 83
- Polubienia
- 17
- Ocena
- 0
P
Printablessonderjul
Perfect-Fit Dyson Airwrap Adapter Base
While designing a custom 90° concentrator nozzle for the Dyson Airwrap (check out my profile), I needed a reliable mounting adapter. The existing models I found online were only of medium quality, they wobbled, leaked air, or the locking…
- Pobrania
- 67
- Polubienia
- 3
- Ocena
- 0
P
Printablessonderjul
High-Performance 90° Concentrator Nozzle for Dyson Airwrap (CFD Optimized)
When I got my girlfriend a new Dyson Airwrap, one of the first things she mentioned was that the standard attachments were a bit too gentle for certain styling jobs. She specifically missed the intense, direct airflow of her old…
- Pobrania
- 62
- Polubienia
- 12
- Ocena
- 5
P
PrintablesDomthebomb
Dyson Airwrap Plug Holder
I designed this plug holder for my wife so I thought to share. Easy to print and make sure you use supports. It's slightly snug and holds the plug well.
- Pobrania
- 39
- Polubienia
- 9
- Ocena
- 0
P
PrintablesLivingLegend
Dyson Airwrap shelf with Corrale
Loved the design of the original and added a Corrale holder. Cut in half with pegs for printer fit
- Pobrania
- 34
- Polubienia
- 0
- Ocena
- 0
P
PrintablesHomefab3d
Dyson Airwrap travel case
This is a remix of https://www.printables.com/model/948160-haarburstenschutz-kompatibel-mit-dyson-airwrap to adapt it to the larger-sized version of this Dyson airwrap. The part shown in the image was printed in PLA Mystic Brown…
- Pobrania
- 21
- Polubienia
- 4
- Ocena
- 0
P
PrintablesPrime_Dimension
Dyson - Airwrap accessory stand
Hair Accessory Organizer Stand (3-in-1 Holder) A compact and practical desktop organizer designed to neatly store everyday hair accessories. This stand features two circular holders for items that come with the appliance. The design…
- Pobrania
- 9
- Polubienia
- 1
- Ocena
- 0
P
PrintablesLeo
Вилка для ремонту фену Dyson styler plug repair Dyson airwrap
Modeled for Dyson hair styler Use optional folders in .blend model to configure the final output, but here is 2 typical .stl to print - with click-and-hold and 2xM1 screw mounting alternatives Print with 0.1mm layer height, tree supports…
- Pobrania
- 7
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMAHWE
Schutzkappe für Dyson Airwrap i.d.
Schutzkappe für Dyson Airwrap i.d.
- Pobrania
- 6
- Polubienia
- 0
- Ocena
- 0
P
PrintablesLucidguy
Dyson Airwrap Wall Mount
Get your Dyson Airwrap out of the way, with friction-fit slot for the wand and storage for two accessories/attachments. The rails and tray is designed to hold the power brick to prevent it from dangling from the wall during usage.
- Pobrania
- 4
- Polubienia
- 0
- Ocena
- 0
P
PrintablesDaniel Valadas
Wall mount for Dyson AirWrap Co-anda 2x power block
Allows temporary or permanent mounting of the big heavy power block to a way or shelf.
- Pobrania
- 4
- Polubienia
- 1
- Ocena
- 0
P
PrintablesMz
Dyson Airwrap dust blower attachment
The nozzle is designed with an 18 degree angle and 10mm opening. There may be a more optimal design, but I found this suitable for blowing out the small fins in the water cooling radiator. The base is made wider, as its quite hard to take…
- Pobrania
- 2
- Polubienia
- 1
- Ocena
- 0
P
Printables
Holder for Dyson Airwrap i.d.
This is a very easy fixture for the Dyson Airwrap. You can use it to attach the Airwrap to anything in your bath- or dressing room. The printable file includes both parts. The lower part is tilted by 15° and printed inclined. Using this…
P
Printables
High-Performance 90° Concentrator Nozzle for Dyson Airwrap (CFD Optimized)
When I got my girlfriend a new Dyson Airwrap, one of the first things she mentioned was that the standard attachments were a bit too gentle for certain styling jobs. She specifically missed the intense, direct airflow of her old…
P
Printables
Perfect-Fit Dyson Airwrap Adapter Base
While designing a custom 90° concentrator nozzle for the Dyson Airwrap (check out my profile), I needed a reliable mounting adapter. The existing models I found online were only of medium quality, they wobbled, leaked air, or the locking…
P
Printables
Dyson - Airwrap accessory stand
Hair Accessory Organizer Stand (3-in-1 Holder) A compact and practical desktop organizer designed to neatly store everyday hair accessories. This stand features two circular holders for items that come with the appliance. The design…
P
Printables
Dyson Airwrap Twistlock Station V2
This is a Dyson Airwrap wall mount station that can be used to hold the wand and 4 accessories in a simple and secure twist lock configuration. This mount consists of two parts: A wall bracket that you can fasten using your choice of wall…
P
Printables
Bracket for Dyson Airwrap attachments
This is a plate with 6 brackets for Dyson Air Wrap attachments. The base plate has a recess so that it fits under an IKEA "VARIERA" shelf - see pictures. Of course, it can also simply be used as a holder for Dyson Airwarp attachments. The…
P
Printables
Dyson Airwrap Holder (Snap-In)
Holder for Dyson Airwrap, consisting of 3 Parts: - Upper Bracket (Snap-In) - Lower Bracket - Holder for Power Supply Very practical. 4 mm Screw (e.g. Spax with sunk-head) are used for mounting. The Airwrap is put into the lower bracket,…
P
Printables
Holder for Dyson Airwrap i.d.
This is a very easy fixture for the Dyson Airwrap. You can use it to attach the Airwrap to anything in your bath- or dressing room. The printable file includes both parts. The lower part is tilted by 15° and printed inclined. Using this…
P
Printables
Dyson Airwrap Tool Holder
The tool holder has an indicator on top to show how to lock the different tools. Works with the newest Dyson AirWrap i.d. model. Tools sit tight. The holder can be attached to a wall using double sided tape. The spare on the backside…
P
Printables
Gridfinity Dyson Airwrap
Gridfinity bins for Dyson Airwrap attachments. Printed on a Bambu Labs X1C using Polytera Silk PLA and the standard Bambu 0.20 Standard print profile.
P
Printables
Dyson Airwrap display stand
Printed parts: Bottom Plate Left x 1 Pc Bottom Plate Right x 1 Pc Rear Plate x 1 Pc (There are two versions, smooth and V1 with a sun shape on the back.) Top Plate Left x 1 Pc Top Plate Right x 1 Pc Side Left x 1 Pc Side Right x 1 Pc…
P
Printables
Dyson Airwrap case insert
The insert just pressure fits inside the middle compartment. Each Brush goes on either side of the divider. The filter cleaning brush notches in the centre. 20% infill, 0.2m layer height. I printed in PETG, but PLA is fine.
P
Printables
Dyson Airwrap Holder
Other holders I found and tried are not convenient to use - they require you to precisely stick the device the holder, and on top of that the header holder did not match headers what so ever. This model does not have a header holder -…
P
Printables
Dyson Airwrap id holder
Dyson Airwrap Bathroom Wall Mount (No-Support Design) Technical Specifications Design: Two-part modular system. Assembly: Glue parts together using superglue . Mounting: * Model 1: With screw holes. Model 2: Flat back for adhesive/glue.…
P
Printables
Dyson Airwrap & Accessory Holder
Strong and durable Dyson Airwrap & Accessory Holder. Mountable with strong double sided tape or screws.
P
Printables
Dyson Airwrap Wall Organizer
The wife wanted a clean way to easily organize and use her Dyson Airwrap and accessories. All the accessories nicely fit without falling off/out, but are still easy to retrieve. The shelves have tiny “notches” in the top of them to help…
P
Printables
Dyson AirWrap Zubehör Halter
Halter für die Aufsätze des Dyson Airwrap mit Verrastung. Daher auch für die Montage kopfüber geeignet.
P
Printables
Basic DYSON AIRWRAP ROUND BRUSH PROTECTION COVER
Dyson Airwrap Round brush filaments can be damaged or bent when you travel with your dysoin Airwarp in a bag. This protection cover avoid the brush filaments to be bent, avoid tangling with other things and keep your brush protected. Easy…
P
Printables
Dyson Airwrap accessory holder
I stick these inside the bathroom vanity. Use double sided tape to stick these on.…
P
Printables
Dyson Airwrap wall mount
Step 1: Print all parts (2x hooks, 4x inserts, 1x cable tidy). No rafts or supports are needed. Step 2: You'll need a piece of wood with the following dimensions: 250x80x20mm Step 3: Drill 4 holes into the wood using a 45mm drill. Leave…
P
Printables
Dyson airwrap universal mount (no support)
I designed this universal mount to fit different types of mounts. All you need is a model with a hole that is 44.15mm wide and 8mm deep. The model does not require support. You need a very precise printer for a perfect fit. I included…
P
Printables
Support Clone AirWrap
Un support pour le sèche cheveux clone du AirWrap de Dyson, celui ci à été acheté sur aliexpress mais le support est probablement compatible avec d'autres modèles provenant d'autres boutiques
P
Printables
Bracket for Dyson Airwrap without cutout
This is a plate with 6 brackets for Dyson Air Wrap attachments. The base plate on request hast no cutout for the IKEA "VARIERA" shelf : The brackets have recesses for the Dyson Airwrap attachments so that they can neither wobble nor…