1 / 1
Вилка для ремонту фену Dyson styler plug repair Dyson airwrap
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For Dyson styler power plug Use 4mm nickel, brass or copper wire to shape the contact terminals
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 132
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
Modeled for Dyson hair styler
Use optional folders in .blend model to configure the final output, but here is 2 typical .stl to print - with click-and-hold and 2xM1 screw mounting alternatives
Print with 0.1mm layer height, tree supports
Use 4mm nickel, brass or copper wire to shape the contact terminals
If i had a non-destroyed original plug, i would also had modeled a proper mounting solution, 1 to 1 with the original one (turn-based + glue instead of click-and-hold/thtoughout-hole screw)
