1 / 3
Anycubic Kobra 3 Ultimate Part Cooling Fan Shroud — zdjęcie 1
1 / 3

Anycubic Kobra 3 Ultimate Part Cooling Fan Shroud

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

High air volume part cooling fan shroud. Bridges and overhangs variant included as well.

Ocena
3 / 5
Polubienia
22
Pobrania
152
Wydruki
1
Wyświetlenia
793
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

My goal was to make one that is more quiet with large air volume output. After five iterations, I am quite happy how it performs in all directions.

Print at 45deg with brim, no supports needed.

Primary differences from stock are air-vents that begin earlier and are longer (for cooling from all directions), plenum is larger with internal baffle to distribute air throughout the vent more evenly while muffling noise. Also, shroud's raised middle allows unobstructed view of the nozzle and better print head LED light coverage.

To test the performance I used 20x200mm cylinder printed in vase mode at high speed ( in 12 minutes), 0.2 layer height, 08 width. Many other coolers failed to cool front or the back of the cylinder.

Note:

Variant 4 is for more efficient overhang and bridge cooling. Use (12mm in my case) piece of paper to balance the air flow.

Variant 2 is the original (Kobra3_fanShroud4) with tweaks for better fit and easier printing.

Tagi