Ulu Knife Blade Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cover for an Ulu chopping knife. Friction fit for safe storage in a drawer.
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 20
- Wydruki
- 1
- Wyświetlenia
- 56
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
My daughter purchased an Ulu in Alaska and wanted to store it in a drawer rather than on the display stand. She asked for a cover that would stay on for safety. I designed this to have a friction fit for her blade. (Her blade is 1.3mm thick.) The beveled side of the cover is indicates the orientation of the blade. The blade bevel faces the same direction as chamfer on the cover. I printed this at an angle to minimize supports. (If you look closely at the print, you will see some rough sections. I discovered after printing that my nozzle was bent, so I was not getting the usual X1C quality. Didn't want to reprint, but subsequent prints have corrected the quality issue.)