1 / 2
Remix of Leia Organa’s Light Saber by CaseStudyno8 — zdjęcie 1
1 / 2

Remix of Leia Organa’s Light Saber by CaseStudyno8

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A remix to facilitate printing the tricky emittors from the original design by CaseStudyno8

Ocena
0 / 5
Polubienia
7
Pobrania
17
Wydruki
0
Wyświetlenia
130
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Props
Licencja
Creative Commons — Attribution — Noncommercial

So getting the emitter of the original design by CaseStudyno8 to print with a nice and smooth finish is practically impossible: the required supports create a rough surface which doesn’t look nice.  So, I devised a way to get them to print really well. It involves a little more effort, but the results are well worth it.

 The solution

I basically cut the emitter-part in half and printed the bottom half upside down. This gives the bottom half a really clean look. The top half is the glued unto the bottom half. I’ve placed the cut so that it’s almost invisible when the parts are glued together.

 Note: I’ve added the 3MF files for all emitter parts so you don’t have to do all the cutting!

Practical execution

 1. Upper emitter

  • Insert a negative space to help center the small part at the center.
  • Cut 7.0 mm
  • Print as shown below:

Afbeelding met patroon, cirkel, Kleurrijkheid, tekenfilm<p>Door AI gegenereerde inhoud is mogelijk onjuist."></p><ul><li> Center the “cylinder” indicated by the red arrow on the bottom half: use the small hole to align it properly . Then glue it to the bottom part.</li></ul><p><img src=

  • Center the top and bottom part and glue them together

 

 

 

 

 

 

 

 

 

2. Middle emitter

  • Cut at 7.5 mm
  • Print in the same orientation as the upper emitter shown above.
  • Center the top and bottom part and glue them together

  

3. Bottom Emitter

  • Cut at 8.3 mm
  • Print in the same orientation as the upper emitter shown above.
  • Center the top and bottom part and glue them together

The combined results:

 

 

 

 

 

 

 

 

 

 

 

When mounted on the saber:

 

 

 

 

 

 

 

 

 

The 3MF files fior the Upper/Middle/Lower emittor are ready to be printed as provided. Add a few drops of superglue  and your done.

If you got any questions or comments: let me know. Happy printing and I'd love to see pictures of your work !

Thnx to CaseStudyno8 for providing this great design.

Kind regards, Martin

Tagi