Remix of Leia Organa’s Light Saber by CaseStudyno8
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A remix to facilitate printing the tricky emittors from the original design by CaseStudyno8
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 17
- Makes
- 0
- Views
- 130
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial
So getting the emitter of the original design by CaseStudyno8 to print with a nice and smooth finish is practically impossible: the required supports create a rough surface which doesn’t look nice. So, I devised a way to get them to print really well. It involves a little more effort, but the results are well worth it.
The solution
I basically cut the emitter-part in half and printed the bottom half upside down. This gives the bottom half a really clean look. The top half is the glued unto the bottom half. I’ve placed the cut so that it’s almost invisible when the parts are glued together.
Note: I’ve added the 3MF files for all emitter parts so you don’t have to do all the cutting!
Practical execution
1. Upper emitter
- Insert a negative space to help center the small part at the center.
- Cut 7.0 mm
- Print as shown below:

- Center the top and bottom part and glue them together

2. Middle emitter
- Cut at 7.5 mm
- Print in the same orientation as the upper emitter shown above.
- Center the top and bottom part and glue them together
3. Bottom Emitter
- Cut at 8.3 mm
- Print in the same orientation as the upper emitter shown above.
- Center the top and bottom part and glue them together
The combined results:

When mounted on the saber:

The 3MF files fior the Upper/Middle/Lower emittor are ready to be printed as provided. Add a few drops of superglue and your done.
If you got any questions or comments: let me know. Happy printing and I'd love to see pictures of your work !
Thnx to CaseStudyno8 for providing this great design.
Kind regards, Martin