1 / 2
Xshot MPP No Spin Stockplate with thumbscrews — zdjęcie 1
1 / 2

Xshot MPP No Spin Stockplate with thumbscrews

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I modified the stockplate/battery door to allow the use of thumbscrews

Ocena
0 / 5
Polubienia
9
Pobrania
16
Wydruki
0
Wyświetlenia
228
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I didn't want to have to have tools in order to swap out the battery on my MPP, so I modified the stockplate (which is also the battery door) to allow the use of thumbscrews. I used these thumbscrews. 

I also included a version with just one thumbscrew which should allow for the rotation of the stock plate after removing the single thumbscrew as long as the normal screw isn't tightened too much

Hardware:

  • 1x m3 nut (per thumbscrew)
  • 1x m3 screw (per thumbscrew) for the lower thumbscrew (also in single) you will need at least a 25mm or 30mm length screw