1 / 2
Xshot MPP No Spin Stockplate with thumbscrews
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I modified the stockplate/battery door to allow the use of thumbscrews
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 16
- Makes
- 0
- Views
- 228
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I didn't want to have to have tools in order to swap out the battery on my MPP, so I modified the stockplate (which is also the battery door) to allow the use of thumbscrews. I used these thumbscrews.
I also included a version with just one thumbscrew which should allow for the rotation of the stock plate after removing the single thumbscrew as long as the normal screw isn't tightened too much
Hardware:
- 1x m3 nut (per thumbscrew)
- 1x m3 screw (per thumbscrew) for the lower thumbscrew (also in single) you will need at least a 25mm or 30mm length screw
