Netgear JGS524v2 10in Server Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 10in server rack rack setup for the Netgear JGS524v2 switch
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 1
- Wyświetlenia
- 125
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Public Domain
Mac Mini mount used in pictures by Owen on Makerworld.
This is a 10 inch server rack adapter(?) for the Netgear JGS524v2. Sorry for bad pictures. This is really dumb and you should probably not use this, I just didn't want to buy a server rack and I had this switch.
Shell
It doesn't really matter what filament you use. In order to plug the switch in, you need to drill a hole in the left half of the model.
Rack Mounting Side Parts
Print with PETG. I used glue to secure them, then screwed them into the shell. They were spaced 220mm apart, and each side was 60mm away from the edge of the shell.
How To Attach A Mount To It
just drill some holes I couldn't get the spacing right :(