Kitchen Aid pasta roller storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Holder for KitchenAid pasta rollers, they snap into place and remain securely fastened.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 210
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
KitchenAid Pasta Roller Stand (Classic Square Model)
This is a display and storage stand designed for the older, square-style KitchenAid pasta roller attachments (Spaghetti, Fettuccine, and Roller). The rollers snap securely into place and are held firmly, allowing for both attractive countertop display and convenient access during use.
The stand is designed to print flat on its side with no supports required. It’s a larger model, so it may need to be sliced into sections for smaller printers.
Print Details:
Print Time: ~5 hours (on Creality K2 Plus)
Recommended Material: PLA+ or PETG — a small amount of material compliance is helpful for the snap-fit retention.
Adaptive layer heights are highly recommended for best surface finish and fit.
This model features a clean, modern design that complements your mixer setup and keeps your pasta attachments neatly organized and ready to use.