seeed xiao esp32 4 button remote
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Saw this on youtube and mocked it up quick
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 217
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Public Domain
need 4 mechanical keyboard switchs, 4 m3 heat set inserts and m3 screws.
Final Version: My updated, cleaned up version of the remote. Wanted it to have a clean look. There's two housing versions: one if you plan to run it off the usb C all the time, and a taller one that can accommodate a battery (I used a 400mAh LI-PO 702030 Battery). There's also two button versions, one that leaves almost no room between the 4 buttons, and one that adds a bit of space between buttons. Buttons are blank, I added the numbers through my slicer. I printed mine in PETG, 100% infill. Has a nice solid feel to it, didn't take up too much filament.
Old Version: Saw a youtuber who made an esp32 remote to be used with home assistant. He didn't provide the stl files for the model he made so I tried to recreate it. Mocked this up pretty quickly and it comes together nicely, but might redo it to tighten it up a bit. Made to fit the USB C board. Two versions of the top portion: one flat and one countersunk. Bottom requires heat set inserts for m3 screws. For the button, you'll have to print one regular, print one mirrored on the x axis, print one mirrored on the y axis, and print one mirrored on both x and y axis.