seeed xiao esp32 4 button remote
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Saw this on youtube and mocked it up quick
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 32
- Makes
- 0
- Views
- 217
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Public Domain
need 4 mechanical keyboard switchs, 4 m3 heat set inserts and m3 screws.
Final Version: My updated, cleaned up version of the remote. Wanted it to have a clean look. There's two housing versions: one if you plan to run it off the usb C all the time, and a taller one that can accommodate a battery (I used a 400mAh LI-PO 702030 Battery). There's also two button versions, one that leaves almost no room between the 4 buttons, and one that adds a bit of space between buttons. Buttons are blank, I added the numbers through my slicer. I printed mine in PETG, 100% infill. Has a nice solid feel to it, didn't take up too much filament.
Old Version: Saw a youtuber who made an esp32 remote to be used with home assistant. He didn't provide the stl files for the model he made so I tried to recreate it. Mocked this up pretty quickly and it comes together nicely, but might redo it to tighten it up a bit. Made to fit the USB C board. Two versions of the top portion: one flat and one countersunk. Bottom requires heat set inserts for m3 screws. For the button, you'll have to print one regular, print one mirrored on the x axis, print one mirrored on the y axis, and print one mirrored on both x and y axis.