IKEA Skadis mount for T-handle hex/allen wrenches
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Holder for a set of metric T-Handle Allen wrenches that mounts to IKEA Skadis pegboards using the Skadis universal peg
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 201
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A holder for a set of T-Handle Allen keys that mounts to IKEA Skadis pegboards using the Skadis universal peg.
I've designed it to specifically fit these Allen wrench T-handles. If yours are wider than about 120mm they may not fit.
The holder has slots for mounting pegs every 20 cm, so that it can be mounted in a more flexible manner, just be sure to use at least two mounting pegs spaced somewhat equally apart.
I've proved a 3mf file which should allow you to engrave the handle sizes in a different color, for those that have an MMU. The STL file comes without any engraved text, message me if you want it added :).
Print facing down without any supports. Use 3 perimeters and about 20% infill.