Cup Extender for Toyota/Citroen/Peugeot/Fiat/Opel vans
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cup Holder Extender from the 62mm cup holder on the dashboard to 87mm.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 83
- Wydruki
- 0
- Wyświetlenia
- 574
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
Designed this for the Toyota Proace City. This van is the same build as the Citroën Berlingo, Peugeot Partner/Rifter, Fiat Doblo and Opel Combo.
Also works on bigger versions, like Toyota Proace, Citroen Jumpy, Peugeot Expert, Fiat Scudo and Opel Vivaro.
I used OpenSCAD to design the model.
Cup Holder Extender from the 62mm on the dashboard to 87mm. The conic shape inside allows for thinner than 87mm bottles/cups to get a tighter hold.
This is v2 to add features and fix problems.
v2: Increased the diameter of the top part in order to hold a specific thermo I own (Decathlon Thermos Bottle 1L). Also made the bottom part conic so it fits better on the dashboard cupholder and doesn't rattle around. Made the transition between girths conic so it can be printed on the widest part without overhangs.
Is a bit taller than required for a regular coffee cup or thermos. Larger bottles need a higher hold so they don't tilt that much on curves.
I printed on ASA to withstand summer heat in southern Europe and sun exposure.
Feel free to comment and suggest improvements. And of course remix.