1 / 2
AnaNAS (PiNASpple) Raspberry Pi 5 + Radxa Penta SATA Hat Enclosure — zdjęcie 1
1 / 2

AnaNAS (PiNASpple) Raspberry Pi 5 + Radxa Penta SATA Hat Enclosure

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is my take on a enclosure for the Raspberry Pi 5, an Radxa Penta SATA Hat and 4x SSDs. It's a practical pun.

Ocena
0 / 5
Polubienia
4
Pobrania
51
Wydruki
0
Wyświetlenia
993
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I have created a real-life dad-joke (in german at least): 

This is AnaNAS. The Pineapple, that holds your NAS based on a Raspberry Pi 5, a Radxa Penta SATA Hat and 4x 2.5" SSDs/HDDs. It has a hole in the top where a 40mm fan can be mounted to make cooling easier, and the pineapple part is split in two for easy installation. 

The PI can be powered through RADXAs Penta SATA Hat, so I have omitted the USB connectors on the PI to make for a cleaner design.

If you want even better airflow, there is a hole below the PI for air intake - this of course only works, if you add some sort of feet to the model :)

I have used PLA+ in yellow for the pineapple and PETG green for the leaves. Print took about 28h on my Sidewinder X2. 

Tagi